TSC Shale Shaker FAQ | Operation & Troubleshooting

2026-10-23 20:44

HYRIG can supply the TSC HS series shale shakers range and its spare parts. This page provides answers to frequently asked questions about the operation and maintenance of the TSC HS series shale shakers.

Frequently Asked Questions

Q1: How do I adjust the deck angle of the HS shale shaker?  

A: Turn the up and down handle to adjust the front spring pedestal. The angle can be adjusted from -2° to +8° without shutting down the equipment.

Q2: What is the function of the hook bolt tension system?  

A: It allows for quick screen changes. When the bolt head is horizontal, the hook plate is locked. When vertical, it is released. Tighten the middle hook plate bolt first, then the end bolts.

Q3: What kind of grease is used for the vibration motor?  

A: Only LGHP2 high-temperature grease is recommended for standard motors. Martin motors require Kluber Isoflex Topas NB52.

Q4: How often should the vibration motor bearings be lubricated?  

A: Change the grease every 2000 hours. If the motor shell temperature exceeds 90°C, halve the lubrication cycle for every additional 10°C.

Q5: What should I do if the shale shaker vibrates abnormally?  

A: Check for loose base bolts, missing rubber pads, or both motors rotating in the same direction. Correct these issues or replace worn parts.

Q6: What should I do if the discharge flow is not smooth?  

A: Check if one motor is not working, if the rotation direction is wrong, if the screen tension is inadequate, or if there is too much sediment on the screen. Correct or clean as necessary.

Q7: How to remove and install the screen?  

A: Stop the machine and clean the basket. Knock the wedge with a rubber hammer to take out the wedge and screen. Place the new screen, install the wedge on the track, and hammer it tight. Ensure the screen is uniformly tensioned.

Q8: Does HYRIG supply TSC HS shale shaker spare parts?  

A: Yes. HYRIG supplies the TSC HS series shale shakers and matching spare parts, including vibrating motors, screens, springs, rubber gaskets, and hook bolts.

Related Pages

Contact

For TSC shale shaker technical support and spare parts, contact HYRIG: info@hyrig.com

Name:
Message:
Verification code:
Submit
Comment