HYRIG can supply the TSC HA series drilling fluid mixers range and its spare parts. The TSC HA double impeller mixer parts page lists key replacement components for this drilling fluid agitator.
| Part Name | Part No. | Qty | Remarks |
|---|---|---|---|
| Shaft Assembly (HA-7.5-2) | HNJ7.5-03 | 1 | For HA-7.5-2 |
| Upper Impeller Assembly (HA-7.5-2) | HNJ7.5-04 | 1 | |
| Lower Impeller Assembly (HA-7.5-2) | HNJ7.5-07-2 | 1 | |
| Lower Impeller Assembly (HA-11-2) | HNJ15-07-2 | 1 | For HA-11-2 and HA-15-2 |
| Elastic Block | HNJ4-03 | 1 | Used across most models |
| Motor Coupling (HA-7.5-2) | HNJ7.5-01 | 1 | |
| Reducer Coupling (HA-7.5-2) | HNJ7.5-04 | 1 | |
| Reducer Output Shaft Bearing (TWPX175) | 30214 | 2 | |
| Reducer Input Shaft Bearing (TWPX175) | 30211 | 2 | |
| Reducer Input Shaft Oil Seal | 55×80×10 | 1 | |
| Reducer Output Shaft Oil Seal | 70×100×12 | 1 |
Qty as per parts list; verify against original drawing.
Lower impeller assembly for HA-7.5-2, part no. HNJ7.5-07-2. Provides additional circulation for deep tanks.
Elastic block, part no. HNJ4-03. Used in the jaw coupling between the motor and reducer.
Shaft assembly for HA-7.5-2 double impeller mixer, part no. HNJ7.5-03.
For TSC HA double impeller mixer spare parts, contact HYRIG: info@hyrig.com