TSC HA Single Impeller Mixer Parts | HNJ7.5-06 Shaft & HNJ4-03 Block

2026-10-23 16:58

HYRIG can supply the TSC HA series drilling fluid mixers range and its spare parts. The TSC HA single impeller mixer parts page lists key replacement components for this drilling fluid agitator.

Key Facts

  • Series: TSC HA (Single Impeller)
  • Page type: Spare parts aggregation
  • Covered parts: Shaft assembly, upper impeller, elastic block, reducer bearings, oil seals, worm gear
  • Part numbers: As per TSC HA mixer parts list
  • Quantity note: Qty as per parts list; verify against original drawing
  • Supply: HYRIG can supply as a set or individually

Parts Table

Part NamePart No.QtyRemarks
Shaft Assembly (HA-7.5)HNJ7.5-061For HA-7.5
Upper Impeller Assembly (HA-7.5)HNJ7.5-071For HA-7.5
Elastic BlockHNJ4-031Used across most models
Motor Coupling (HA-7.5)HNJ7.5-011
Reducer Coupling (HA-7.5)HNJ7.5-041
Reducer Output Shaft Bearing (TWPX175)302142
Reducer Input Shaft Bearing (TWPX175)302112
Reducer Input Shaft Oil Seal55×80×101
Reducer Output Shaft Oil Seal70×100×121
Worm Gear (TWPX175)TWPX175-081
Worm Shaft (TWPX175)TWPX175-151

Qty as per parts list; verify against original drawing.

Common Spare Parts

Shaft Assembly HNJ7.5-06 (#shaft-assembly)

Shaft assembly for HA-7.5 single impeller mixer, part no. HNJ7.5-06. Connects the reducer output to the impeller.

Elastic Block HNJ4-03 (#elastic-block)

Elastic block, part no. HNJ4-03. Used in the jaw coupling between the motor and reducer. Acts as a wear part and damper.

Upper Impeller Assembly HNJ7.5-07 (#impeller)

Upper impeller assembly for HA-7.5, part no. HNJ7.5-07. Must be checked for entangled materials before operation.

Notes

  • Material, wear limits and replacement intervals are not specified in the parts list; confirm with supplier.
  • Standard fasteners such as bolts, nuts and washers are listed in the complete parts list and are not individually detailed on this page.
  • For the complete parts list, request the TSC HA mixer parts list.

Related Pages

Contact

For TSC HA single impeller mixer spare parts, contact HYRIG: info@hyrig.com

Name:
Message:
Verification code:
Submit
Comment