The Urea Solution Transfer Pump is an API 610 Type OH2 horizontal, single‑stage, overhung, centerline‑mounted centrifugal pump specifically engineered for handling urea solution (CO(NH₂)₂ aqueous solution) and related corrosive process fluids in fertilizer plants, urea production units, and chemical processing facilities. The pump is fully compliant with API 610 11th Edition and ISO 13709 standards, ensuring heavy‑duty reliability for continuous, critical service in the urea and fertilizer industry.
What is a Urea Solution Transfer Pump?
In urea manufacturing and downstream processing facilities, aqueous urea solution must be transferred between various process stages, including:
From the synthesis section to evaporation and concentration units
Between storage tanks and distribution headers
From storage to granulation, prilling, or bagging systems
In urea‑based selective catalytic reduction (SCR) systems for NOx reduction
In urea ammonium nitrate (UAN) solution blending and transfer
Urea solution is typically operated at elevated temperatures (60–120°C, depending on concentration and process stage) to prevent crystallization, as urea solution tends to solidify or form crystals when temperature drops below its saturation point.
Why API 610 for Urea Solution Service?
API 610 is the global standard for centrifugal pumps used in petroleum, petrochemical, and natural gas industries, emphasizing reliability, safety, and long service life in demanding applications. The standard covers design, materials, manufacturing, testing, and inspection requirements.
For urea solution transfer, API 610 compliance ensures:
Corrosion resistance — through appropriate material selection from API 610 Table H‑1, which specifies wetted material classes suitable for corrosive urea and ammonium carbamate service
Thermal stability — centerline mounting accommodates thermal expansion at elevated temperatures
Leak prevention — API 682 compliant seal chambers supporting double mechanical seals for zero‑leakage containment of corrosive and hazardous urea solutions
Maintenance efficiency — back pull‑out design allows internal component removal without disturbing piping
Long service life — heavy‑duty construction ensures 3–5 years continuous operation between overhauls
As a specialized China API 610 pump manufacturer, we produce fully API 610 11th Edition compliant urea solution transfer pumps that satisfy the rigorous demands of the fertilizer industry while offering competitive cost and lead time advantages.
This pump series is specifically engineered for handling urea‑based solutions and related corrosive process fluids:
Primary Media:
Urea solution (aqueous) — CO(NH₂)₂ dissolved in water; concentrations typically 20–80%
Melt urea — molten urea at elevated temperatures (120–180°C)
Ammonium carbamate solution — corrosive intermediate in urea synthesis
Urea ammonium nitrate (UAN) solution — liquid fertilizer blend
Non‑suitable applications: Carbon steel and standard austenitic stainless steels (304, 316) have insufficient resistance to ammonium carbamate corrosion. For carbamate service, super duplex (25% Cr) or higher alloys are mandatory.
Fluid Characteristics and Engineering Challenges:
| Corrosivity | Urea solutions are moderately corrosive at elevated temperatures. Decomposition products (biuret, ammonia, ammonium carbamate) increase corrosion rates. Ammonium carbamate — the intermediate formed during urea synthesis — is highly corrosive and causes rapid degradation of carbon steel and austenitic stainless steels. |
| Crystallization tendency | Urea solution tends to crystallize when temperature drops below its saturation point (typically around 60–70°C for concentrated solutions). Crystallization within the pump casing, seal chamber, or piping can cause severe damage — wear ring galling, seal failure, impeller blockage, and shaft seizure. Pump designs commonly incorporate steam jackets or heating elements to maintain temperature. |
| Temperature range | 60–120°C typical for aqueous urea solution; up to 180°C for melt urea. Low temperature is not generally an issue, but proper heat tracing and temperature monitoring are critical. |
| Abrasive potential | Urea may contain small amounts of solid impurities (biuret, dust, corrosion products). Though primarily clean, solids can accelerate wear of wear rings, bushings, and seal faces. |
| Toxicity and handling | Urea solutions are not acutely toxic, but repetitive skin contact may cause dermatitis. Ammonium carbamate is highly corrosive and toxic — zero‑leakage sealing is mandatory for carbamate service. |
Material Selection Considerations for Urea Solution Transfer Pumps:
Material selection must consider both urea solution and the corrosion potential of decomposition products (ammonium carbamate). The table below summarizes standard material choices for urea solution pumps:
| Material | Urea Solution Corrosion Resistance | Ammonium Carbamate Resistance | Suitability | Cost Level |
|---|---|---|---|---|
| Carbon Steel | Poor — rapid corrosion at elevated temperatures | Not suitable | Not recommended | Low |
| 304 Stainless Steel | Fair — limited pitting resistance | Not suitable (corrodes rapidly) | Limited — for low‑temperature, low‑concentration urea only | Moderate |
| 316/316L Stainless Steel | Good — acceptable for urea solution service | Not recommended | Acceptable for urea solution (not carbamate) | Moderate |
| Duplex 2205 | Excellent — superior pitting and stress corrosion resistance | Fair — limited for high‑temperature carbamate | Good for urea solution and moderate carbamate exposure | Moderate‑High |
| Super Duplex 2507 | Excellent | Good — higher resistance than 2205 | Recommended for urea service with carbamate risk | High |
| 25% Cr Super Duplex | Excellent | Excellent | Preferred for ammonium carbamate service (e.g., Apollo custom design) | Very High |
| Higher Alloys (Hastelloy, Inconel) | Excellent | Excellent | Specialized for extreme conditions | Highest |
Recommendation for urea solution transfer pump: 316L stainless steel is the standard, cost‑effective choice for clean urea solution service without significant ammonium carbamate exposure. For urea service involving carbamate recirculation or higher corrosion risk conditions, super duplex (≥25% Cr) is mandatory.
O‑ring and gasket selection: Use PTFE, FFKM (Kalrez/Chemraz), or EPDM (urea‑compatible). Avoid natural rubber, silicone, or Buna‑N in contact with urea or carbamate service.
Selecting the correct API 610 urea solution transfer pump requires systematic evaluation of process parameters, fluid properties, and installation conditions.
Step 1: Define Operating Conditions
Accurate operating data is the foundation of proper pump selection. Key parameters needed:
| Parameter | Required Information |
|---|---|
| Flow rate (Q) | Rated flow, normal flow, minimum flow |
| Total head (H) | Discharge pressure (or head) at rated flow |
| Fluid temperature | Operating range (minimum, normal, maximum) |
| Fluid composition | Urea concentration, additives, potential decomposition products |
| Corrosion potential | Presence of ammonium carbamate, chlorides, or other aggressive species |
| NPSH available (NPSHa) | Suction side conditions at pump inlet |
| Viscosity | Urea solution viscosity varies with concentration and temperature |
| Specific gravity | Density relative to water at operating temperature |
| Solids content | Particulate concentration (if present) |
| Operating cycle | Continuous or intermittent; expected hours per year |
Step 2: Determine Pump Type
For urea solution transfer service, pump types are selected based on flow rate, head, and installation requirements:
| Flow Range (m³/h) | Head Range (m) | Recommended Pump Type |
|---|---|---|
| 1 – 300 | Up to 150 | API 610 OH2 — Horizontal, single‑stage, overhung (most common for urea solution transfer) |
| 10 – 500 | Up to 250 | API 610 OH2 or OH1 — Depending on baseplate and mounting requirements |
| 0.5 – 60 | Up to 400 | Integrally geared high‑speed pump (for low‑flow, high‑head urea circulation) |
| 100 – 2,600 | 20 – 300 | API 610 OH2 larger frame sizes |
| Multistage requirements | >250 m | API 610 BB3 or BB5 (rare for standard urea transfer; may be specified for urea melt pumping) |
Step 3: Select Pump Size and Speed
Once pump type is selected, the specific pump size (impeller diameter, casing size) and operating speed are determined to meet the required flow and head while maximizing efficiency. The rated operating point should generally be selected within 70–120% of the Best Efficiency Point (BEP) to ensure reliable operation and extended component life.
Step 4: Select Materials of Construction
Material selection is the most critical aspect of urea solution pump specification. The following matrix provides guidance:
| Component | Standard Material | Optional Upgrade |
|---|---|---|
| Casing | 316L Stainless Steel | Duplex 2205 / Super Duplex 2507 / 25% Cr for carbamate |
| Impeller | 316L Stainless Steel (closed) | Duplex 2205 / Super Duplex |
| Shaft | 316L or 17‑4PH Stainless Steel | Duplex 2205 |
| Wear Rings | 316L with hard facing | Tungsten carbide / Stellite coating |
| Mechanical Seal Faces | Silicon carbide vs. carbon | Tungsten carbide vs. silicon carbide |
| O‑rings & Gaskets | PTFE or EPDM | FFKM (high‑temperature service) |
| Casing Bolting | A193 B8M (316 SS) | Duplex / Monel |
Step 5: Determine Temperature Management Requirements
Urea solution crystallization below approximately 70°C is the most common operational problem with urea pumps. Temperature management requirements include:
Steam jackets — Recommended for concentrated urea solution and melt urea service. Steam jackets are integral to the pump casing (front and back covers), allowing low‑pressure steam (typically ≤0.6 MPa, up to 170°C) circulation to maintain fluid temperature above the crystallization point.
Heat tracing — For external piping associated with the pump, electrical or steam heat tracing should be considered to prevent crystallization in dead legs and low‑flow areas.
Bearing housing cooling — For high‑temperature service (>120°C), water‑cooled bearing housings are recommended to keep bearing temperatures within safe operating limits (≤75°C).
Step 6: Select Seal System
Seal selection for urea solution service is driven by fluid corrosivity and crystallization tendency:
| Service Type | Recommended Seal Configuration | API 682 Flush Plan |
|---|---|---|
| Clean urea solution (≤80°C) | Single mechanical seal | Plan 11 (internal recirculation + orifice) or Plan 02 (dead‑ended) |
| Urea solution with crystallization risk | Tandem mechanical seal | Plan 52 (unpressurized buffer fluid) — quench prevents crystal accumulation |
| Corrosive urea / carbamate service | Double mechanical seal | Plan 53B (pressurized barrier fluid reservoir) — zero leakage |
| High‑temperature urea melt | Double mechanical seal with cooling | Plan 53B with cooler, or Plan 54 (external barrier fluid circulation) |
Step 7: Specify Auxiliary Features
Based on the specific service conditions, additional features may be required:
| Auxiliary Feature | Required When |
|---|---|
| Steam jacket on casing | Concentrated urea solution or melt urea service (temperature required above crystallization point) |
| Bearing housing cooling | Operating temperature >100°C |
| Minimum flow recirculation | System may operate below pump minimum continuous stable flow |
| Heating elements in seal chamber | Cold startup conditions or risk of seal face crystallization |
| Flushing connections in casing | Service where periodic cleaning for crystallized deposits may be required |
| NACE compliance | Sulfide‑containing environments (not typical for urea service) |
Step 8: Additional Considerations for Urea Solution Pumps
Beyond standard hydraulic selection, urea solution pumps require special attention to:
Crystallization Prevention Design:
Avoid dead legs within the pump casing. Design the internal flow passage to ensure continuous flow across all wetted surfaces.
Provide steam jackets on the front and back casing covers, and wherever deposition is likely.
Maintain the entire wetted path at a temperature above the urea saturation point — typically 5–10°C margin.
Use flush plans that continuously purge the seal chamber when the pump is idle to prevent crystal buildup.
Corrosion Margin:
Urea solution is inherently corrosive at elevated temperatures. Adding 2–3 mm corrosion allowance is typical practice for 316L wetted parts if extended service life (10+ years) is required without material replacement.
Avoid sharp corners and crevices in flow passages where pitting corrosion can initiate.
Abrasion Handling:
For urea containing trace solids (e.g., biuret or corrosion products), tungsten carbide seal faces reduce wear rates.
Hard‑faced (Stellite) wear rings resist galling.
Seal Flush Considerations:
For Plan 11 (internal recirculation), use an orifice sized for the specific service to control flow. Flush fluid recirculated from discharge must remain above crystallization temperature — verify orifice sizing does not result in excessive temperature drop across the seal chamber.
For carbamate service, Plan 53B with clean barrier fluid is mandatory; carbamate must never contact the atmosphere.
Third‑Party Standards: Pump testing and inspection should follow API 610 requirements, including hydraulic performance testing (Q‑H, efficiency, NPSH3), mechanical run testing, vibration and bearing temperature monitoring, and hydrostatic testing of the casing at 1.5× design pressure. For urea service, additional material verification (PMI testing) and hardness checks may be requested by end users.
API 610 urea solution transfer pumps incorporate design features specifically addressing the unique challenges of this service:
Back Pull‑Out Design: The rotating assembly (impeller, shaft, mechanical seal, bearing housing) can be removed without disturbing the pump casing or piping connections. This feature significantly reduces maintenance downtime — critical for continuous urea plant operations.
Centerline Mounting: The casing is supported at the horizontal centerline, allowing symmetrical thermal expansion. For urea solution at 60–120°C, this prevents misalignment that would otherwise shorten seal and bearing life.
Steam Jacket (Optional): For melt urea or concentrated solution service, the casing is furnished with an integral steam jacket. Low‑pressure steam (≤0.6 MPa, up to 170°C) circulates through the jacket, maintaining the wetted surfaces above the urea crystallization temperature. Steam jackets are typically provided on both the front and back covers for complete coverage.
Renewable Wear Rings: Casing and impeller wear rings are replaceable without replacing the casing or impeller. For urea service, wear rings are hard‑faced to resist galling if crystallization occurs.
API 682 Seal Chamber: The seal chamber is dimensioned to accept all API 682 3rd or 4th Edition cartridge mechanical seals without modification. This allows easy specification of double seals for carbamate service or heated seal chambers for urea melt applications.
Rigid Shaft Design: Large diameter shaft minimizes deflection and ensures stable rotor dynamics, extending mechanical seal life.
Open or Enclosed Impeller: Although standard API 610 pumps normally use enclosed impellers, open impeller configurations are occasionally specified for urea service to tolerate small solids from crystallization or decomposition products while minimizing clogging risk.
API 610 urea solution transfer pumps are essential equipment across multiple fertilizer and chemical process applications:
Urea Production Plants:
Transfer of urea solution from synthesis section to evaporation section
Circulation between evaporation stages
Feed to prilling tower or granulation unit
Recycle of off‑spec urea solution
Urea Formulation and Blending:
Urea ammonium nitrate (UAN) solution mixing and transfer
Urea‑based suspension fertilizer circulation
Dilution and blending of concentrated urea solution
Urea Storage and Distribution:
Loading pumps for railcars and tank trucks
Unloading pumps from bulk storage
Circulation between storage tanks
Transfer to day tanks and process headers
Selective Catalytic Reduction (SCR) Systems:
Urea solution feed pumps for NOx reduction in power plants, cement plants, and marine applications
Recirculation pumps for urea‑based SCR systems
Transfer between urea storage and injection skids
Coal Chemical and Petrochemical:
Urea solution transfer in coal‑to‑urea complexes
Ammonia‑urea handling in integrated fertilizer facilities
General Chemical Processing:
Transfer of urea‑containing process streams
Corrosive fluid transfer requiring API 610 reliability
As a specialized China API 610 pump manufacturer with extensive experience in urea and fertilizer applications, we deliver:
Full API 610 11th Edition (ISO 13709) compliance — designed, manufactured, and tested to the same rigorous standards as leading global brands
Corrosion‑resistant material selection — 316L stainless steel, duplex, super duplex, and specialized alloys available
Crystallization prevention design — steam jackets, proper flush plans, and temperature management features integrated into the design
Competitive capital cost — typically 25–35% lower than major Western brands for equivalent API 610 configurations
Shorter lead times — 16–24 weeks ARO for standard material configurations
Complete engineering documentation — hydraulic performance curves, NPSH curves, sectional drawings, GA drawings, API 610 data sheets, material certifications, and installation/maintenance manuals
Factory performance testing — witnessed and non‑witnessed options, including hydraulic performance testing, mechanical run testing, vibration monitoring, and bearing temperature monitoring
API 682 seal support systems — complete seal flush panels, reservoirs, and coolers supplied and tested as integrated packages
Global shipping and export packaging — wooden crates, VCI, desiccant, and full export documentation
Spare parts availability — critical spares stocked; complete spare parts kits available for scheduled overhauls
Installation and commissioning support — on‑site supervision, training, and after‑sales service available
| Parameter | Specification |
|---|---|
| Pump Type | API 610 Type OH2 — horizontal, single‑stage, overhung, centerline‑mounted |
| Medium | Urea solution (aqueous CO(NH₂)₂), melt urea, UAN, ammonium carbamate |
| Temperature Range | -20°C to +180°C (typical urea solution: 60–120°C) |
| Flow Range | 1 – 2,600 m³/h (selected to process requirements) |
| Head Range | Up to 250 m per stage (higher available with multistage configurations) |
| Flange Rating | ASME Class 150 / 300 / 600 |
| Materials (Standard) | 316L Stainless Steel — suitable for clean urea solution service |
| Materials (Upgrade) | Duplex 2205 / Super Duplex 2507 — for enhanced corrosion resistance and carbamate service |
| Mechanical Seals | API 682 compliant single/tandem/double cartridge seals; Plan 11, 52, or 53B |
| Auxiliary Features | Steam jacket (optional), bearing housing cooling, minimum flow recirculation |
| Certification | API 610 11th Edition (ISO 13709) |
| Maintenance | Back pull‑out design — internal components removable without disturbing piping |
For more information or a custom engineering proposal for your urea solution transfer pump application, please contact us at:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.