The vertical multistage pump is a compact, high-efficiency centrifugal pump that generates high discharge pressure by combining multiple impellers in series on a single vertical shaft. Each impeller adds energy to the fluid, producing a total head that is the sum of the individual stages. Unlike horizontal multistage pumps, the vertical design occupies a very small footprint – making it ideal for installations where floor space is limited, such as mechanical rooms, containerised plants, and offshore platforms.
Constructed from stainless steel (304 or 316L) as standard, the pump offers excellent corrosion resistance for clean water, demineralised water, reverse osmosis feed, boiler feed, industrial fluids, and mildly aggressive chemicals. The vertical orientation inherently provides low NPSH requirements (due to the vertical shaft with the first stage impeller positioned at the bottom, often with an inducer option) and allows the motor to be mounted on top, keeping the motor dry and above any potential floor flooding.
Available in two major configurations:
Standard industrial – Cartridge‑style, radially split, close‑coupled or long‑coupled, for commercial and general industrial applications.
API 610 VS (vertical suspended) – Heavy‑duty construction for petroleum, petrochemical, and power plant services, offering 20‑year design life and compliance with API 682 sealing.
| Feature | Standard Industrial | API 610 VS (Vertical Suspended) |
|---|---|---|
| Casing | Radially split, single casing | Double casing (VS6) or single casing with sturdy column |
| Mounting | Foot or in‑line flanges | Discharge head above grade, column suspended |
| Design life | 10‑15 years | 20 years minimum |
| Continuous operation | Intermittent or continuous | ≥3 years uninterrupted |
| Materials | 304 / 316L stainless steel | API 610 Table H (S‑8, D‑1/D‑2, C‑6) |
| Seal chamber | Standard cartridge | API 682 certified (Plan 11, 23, 53B, etc.) |
| Bearing life | L10 ≥17,500 hours | L10 ≥25,000 hours |
| NPSH performance | Low (inducer optional) | Very low (custom inducer) |
| Ideal for | RO, boiler feed, building booster | Refinery, offshore, power plant, NACE service |
The API 610 VS pump is typically supplied as a VS6 (vertical double‑case diffuser pump) for very low NPSH and high‑pressure applications, or as a VS1 (vertical single‑case wet pit) for sump and tank applications. For most high‑pressure clean water duties, the standard industrial vertical multistage pump is sufficient and cost‑effective.
| Parameter | Standard Industrial | API 610 VS6 (Heavy Duty) |
|---|---|---|
| Flow range | 2 – 200 m³/h (9 – 880 GPM) | 5 – 150 m³/h |
| Head range | 10 – 400 m (30 – 1,300 ft) | 20 – 400 m |
| Pressure rating | Up to 40 bar (580 psi) | Up to 100 bar (1,450 psi) |
| Temperature range | –20 to +120°C (–4 to +248°F) | –45 to +200°C (–49 to +392°F) |
| Number of stages | 2 – 12 | 3 – 10 |
| Speed | 2,900 / 3,500 rpm | 2,950 / 3,550 rpm |
| Motor power | 0.55 – 110 kW (0.75 – 150 HP) | 2.2 – 200 kW |
| Materials | 304 SS, 316L SS, duplex | 316L SS (S‑8), duplex (D‑1/D‑2), NACE |
| Connections | Flanged (DIN/ANSI) or Victaulic | ANSI / ASME raised face flanges |
| NPSHr (at BEP) | 2 – 5 m (inducer optional to <2 m) | 1.5 – 4 m (inducer standard on low NPSH) |
| Component | Standard (304 SS) | Premium (316L SS) | API 610 (S‑8 / Duplex) |
|---|---|---|---|
| Outer sleeve / chamber | 304 SS | 316L SS | 316L SS (CF3M) |
| Impellers (stages) | 304 SS | 316L SS | 316L SS or 17‑4 PH |
| Diffusers / intermediate chambers | 304 SS | 316L SS | 316L SS |
| Shaft | 304 SS or 316 SS | 316 SS | 17‑4 PH or duplex |
| Wear rings / bushings | PTFE‑impregnated bronze | 316L SS + coating | 316L SS + Stellite |
| Base / support flange | Cast iron or carbon steel (coated) | Stainless steel | Carbon steel with stainless clad |
For seawater reverse osmosis (SWRO) , duplex (D‑1/D‑2) or super duplex is required (PREN >40). For food / pharmaceutical, electropolished 316L with FDA elastomers and tri‑clamp connections are available.
The vertical multistage pump features:
First‑stage impeller with large eye – reduces fluid velocity at inlet, lowering NPSHr.
Inducer option – an axial flow stage before the first radial impeller, reducing NPSHr by 40‑60% (ideal for RO feed from open tanks or deaerators).
Diffuser‑type stage design – converts velocity to pressure efficiently, minimising radial thrust.
Balanced axial thrust – hydraulic thrust is supported by a thrust bearing in the motor or pump head; some designs use balanced impeller configurations.
The pump has a steep, stable head‑flow curve rising continuously to shut‑off, allowing parallel operation without hunting.
| Service | Seal Type | API 682 Plan | Materials |
|---|---|---|---|
| Clean cold water | Single cartridge | Plan 11 | Carbon / ceramic / NBR |
| Hot water (≤120°C) | Single with cooler | Plan 23 | Silicon carbide / carbon / Viton |
| Reverse osmosis (brackish) | Single or tandem | Plan 11 or 52 | Silicon carbide / Viton |
| Reverse osmosis (seawater) | Single (SiC/SiC) | Plan 11 (external flush optional) | Silicon carbide / silicon carbide / FKM or Aflas |
| Boiler feed water | Tandem | Plan 52 | Silicon carbide / Viton |
| Hazardous / chemical | Dual pressurised | Plan 53B | Silicon carbide / silicon carbide / Viton or Aflas |
The API 610 VS pump features an API 682 seal chamber designed to accept any arrangement (single, tandem, dual pressurised) without modification.
| Industry | Application | Typical Pressure | Why Vertical |
|---|---|---|---|
| Water treatment | Reverse osmosis (RO) feed – seawater or brackish | 10‑40 bar | Compact, low NPSH, corrosion‑resistant |
| Power generation | Boiler feed water (drum type) | 15‑40 bar | High pressure, low NPSH when taking suction from deaerator |
| Commercial buildings | High‑rise water booster | 6‑15 bar | Space‑saving, quiet operation |
| Industrial | Process water pressure boosting, wash‑down systems | 5‑20 bar | High efficiency, low maintenance |
| Irrigation | Central pivot, sprinkler systems | 5‑12 bar | Energy efficient, reliable |
| Mining | Dust suppression, process water | 8‑20 bar | Corrosion‑resistant options, compact |
| Chemical / petrochemical | Chemical transfer, injection | 10‑30 bar | API 610 VS option for hazardous zones |
| HVAC | Chilled water circulation (high head) | 5‑15 bar | In‑line mounting, small footprint |
Compact footprint – Takes up to 70% less floor space than horizontal multistage pumps of equivalent capacity.
Low NPSH – First‑stage impeller optimised for low inlet pressure; inducer option for extremely low NPSHa.
High efficiency – Diffuser hydraulics achieve 65‑80% efficiency, reducing operating costs.
Corrosion resistant – 304/316L stainless steel as standard; duplex for aggressive fluids.
Low noise – Vertical design with precision‑balanced rotor; typical noise <70 dB(A).
Easy maintenance – Cartridge seal and replaceable wear parts; rotor can be removed from the top without disturbing piping (in most designs).
Wide hydraulic range – Single pump covers flows from 2 to 200 m³/h, heads to 400 m.
API 610 VS option – For heavy‑duty, 20‑year life, critical service applications.
VFD ready – Suitable for variable frequency drive operation (consult for minimum speed limits).
Global certifications – CE, WRAS/NSF (potable water), ATEX (on request), FDA sanitary finish.
| Test | Standard Industrial | API 610 VS |
|---|---|---|
| Hydrostatic test | 1.5x design pressure (casing) | 1.5x MAWP |
| Performance test | ISO 9906 Grade 3 | API 610 Grade 2 or 1 |
| Mechanical run | 1 hour | Minimum 4 hours |
| NPSH test | Optional | Full verification if specified |
| Material certification | EN 10204 2.2 (standard) , 3.1 (optional) | EN 10204 3.1 (mandatory) |
| NACE MR0175 | Not required | Available on request |
Suction piping – Must be properly sized to avoid cavitation. Use an eccentric reducer (flat on top) to prevent air pockets. Keep suction pipe short and straight.
Discharge piping – Install a check valve and isolation valve downstream. A minimum flow recirculation line is required if the pump may run at low flow for extended periods.
Mounting – The vertical pump is mounted on a baseplate or flanged directly into the pipeline (in‑line version). Ensure the pump is truly vertical and the foundation is rigid.
Electrical – Connect motor according to nameplate. For VFD operation, ensure motor insulation is suitable for inverter duty.
Start‑up – Prime the pump by filling the casing with liquid before start. Do not run dry.
| Task | Frequency |
|---|---|
| Check mechanical seal for leaks | Monthly |
| Monitor motor current, vibration, temperature | Weekly |
| Lubricate motor bearings (if grease‑fitted) | Every 6 months |
| Replace mechanical seal | 8,000‑12,000 hours (or when leaking) |
| Inspect impellers and diffusers | 20,000 hours or 3 years |
| Problem | Likely Cause | Solution |
|---|---|---|
| Low discharge pressure | Worn wear rings / impellers, air in suction, NPSH insufficient | Replace wear rings; vent air; increase NPSHa |
| Pump vibrates | Misalignment, cavitation, rotor imbalance | Re‑align; check suction conditions; balance rotor |
| Motor overload | Specific gravity too high, viscosity too high, flow too high | Check fluid properties; throttle discharge valve |
| Seal leaks | Worn faces, wrong elastomer, dry running | Replace seal; verify materials; ensure flooded suction |
| No flow | Pump not primed, impeller blocked, suction valve closed | Prime pump; clean impeller; open suction valve |
| Component | Recommended Quantity |
|---|---|
| Mechanical seal cartridge (complete) | 1 set |
| Bearing set (motor side, if applicable) | 1 set |
| Wear ring / bushing set | 1 set |
| Gasket / O‑ring kit (full) | 1 set |
| Impeller (first stage) | 1 (optional) |
| Shaft (for critical duty) | 1 |
For detailed selection of the correct vertical multistage pump – including flow and head requirements, NPSHa, fluid composition, material grade (304/316L/duplex), API 610 VS option, seal plan, and motor specifications – please contact our engineering team.
Email: info@hyrig.com
Our engineers support reverse osmosis, boiler feed, high‑rise water boosting, and industrial pressure applications worldwide with reliable, efficient vertical multistage pumps – high pressure in a compact footprint.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.