Product Overview
The HYRIG VS6 LPG In-Tank Submerged Pump is a heavy-duty, multistage, vertical barrel (can type) centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for submerged installation inside LPG (liquefied petroleum gas) storage tanks – including spherical tanks, horizontal bullets, and underground caverns – this pump is immersed directly into the LPG (propane, butane, or mixtures) at temperatures ranging from –50°C to –10°C. The VS6 vertical barrel configuration is the preferred solution for LPG in‑tank service because:
The pump sits at the bottom of the tank, completely submerged in the LPG, providing static liquid head that eliminates NPSH problems – critical for boiling LPG near its vapor pressure.
The vertical design fits through standard tank roof manways or dedicated pump columns, minimizing tank modifications.
Multistage hydraulics deliver sufficient head for long-distance pipelines, truck/railcar loading, and refinery feed without requiring a separate booster pump.
LPG is a volatile, flammable hydrocarbon mixture. The HYRIG VS6 is designed with proper material selection (impact tested carbon steel or stainless steel), API 682 sealing (dry gas or dual seals), and rugged construction to ensure safe, reliable, and continuous operation in LPG terminals, refineries, and autogas loading facilities.
Key Technical Parameters
Pump Type: API 610 VS6 Vertical Barrel, Multistage (2 to 8 stages), Submerged in LPG Tank
Flow Range: 50 – 2000 m³/h (typical LPG pump: 100–1500 m³/h)
Head Range: 100 – 600 m (higher with additional stages for high pressure transfer)
Working Temperature: –50°C to –10°C (propane –42°C, butane –0.5°C, mixtures variable)
Design Pressure: Up to 25 bar (higher for pressurized tank service)
Structure: Vertical barrel (can) fully submerged in LPG; suction inlet at bottom with strainer; pump column hangs from top plate on tank roof; electric motor above roof drives extended shaft.
Seal Standard: API 682 mechanical seal – tandem dry gas seal (Plan 72+75) with heated nitrogen barrier for zero emissions, or pressurized dual seal (Plan 53B) with compatible barrier fluid. Seal located at top of column (above tank roof) in dry environment.
Materials: Low temperature carbon steel (LCB/LCC) for non‑corrosive LPG service – fully Charpy impact tested at –50°C; Austenitic stainless steel (304L/316L) for higher purity or corrosive service (e.g., sour LPG with H₂S). Internal impellers/diffusers from 12% chrome or stainless steel; hardened stellited wear rings.
Application: LPG in-tank pumps for export/import terminals, refinery LPG storage, autogas truck/railcar loading, propane dehydrogenation (PDH) plant feed, and cavern storage withdrawal.
Key Features
API 610 VS6 Compliance – Built to rigorous international standard for vertical, high reliability, continuous duty pumps.
Zero NPSH Concern – Submerged design provides positive static head from liquid column above the pump; no cavitation even with saturated LPG at ambient temperature.
High Flow & Multistage Head – 2 to 8 stages deliver up to 600 m head, enabling direct truck loading (10–15 bar) or pipeline transfer without intermediate boosters.
Low Temperature Integrity – Full Charpy impact testing at minimum operating temperature (–50°C for propane); materials retain toughness; vertical column with expansion allowance handles thermal contraction.
Submerged Safety – No dynamic seals on the pump casing; the only dynamic seal is at the top of column, above the tank roof, minimizing leak points inside the tank.
Leak‑Free Top Seal – API 682 tandem dry gas seal (Plan 72+75) uses heated nitrogen to prevent moisture icing and ensures zero LPG emissions to atmosphere. Optional Plan 53B dual seal with barrier fluid.
Heavy Duty Bearing System – Lower guide bearings (PTFE, carbon‑graphite) lubricated by LPG; top bearings (above roof) oil mist or grease lubricated, thermally isolated from cold zone.
Easy Maintenance – Entire pump cartridge and column can be withdrawn vertically without tank degassing or entry, using a portable extraction device.
Low NPSH Hydraulics – First stage impeller optimized for boiling LPG; optional inducer for extremely low NPSH in bullet tanks with low liquid level.
Full Hydrostatic & Cryogenic Testing – Each pump pressure tested; optional low temperature performance test using liquid nitrogen or propane substitute.
Typical Applications
LPG in-tank pump in pressurized spherical storage (propane, butane, or mix) for terminal loading to trucks/railcars
Refinery LPG rundown tank submerged pump (from storage to feed or loading)
Autogas dispensing station submersible pump (large volume, high pressure for vehicle filling)
Propane dehydrogenation (PDH) plant feed pump from storage spheres
Underground cavern LPG withdrawal pump
Ethylene / propylene cooled storage tanks (similar VS6 design with lower temperature materials)
Why HYRIG?
HYRIG combines specialized LPG and cryogenic engineering with API 610 VS6 reliability. Each VS6 LPG In‑Tank Submerged Pump is designed with impact tested low temperature materials, submerged zero‑NPSH hydraulics, API 682 top‑mounted dry gas seal for emissions control, easy pull‑out column design, and multistage performance tailored to LPG vapor pressure and flow requirements. Our VS6 pumps are installed in LPG terminals, refineries, and autogas facilities worldwide, delivering safe, reliable, and efficient in‑tank transfer for decades.
Contact Us
For technical quotation, multistage hydraulic selection, low temperature material certification, or custom solutions for your LPG storage and transfer system, please email us at: info@hyrig.com
Our engineering team will respond within 24 hours with a pump selection optimized for your LPG composition (propane/butane ratio), tank geometry, flow, and head requirements.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.