HYRIG can supply the XBSY SB series solid control sand pumps range and its spare parts. The XBSY SB6×8J parts page lists key replacement components for this forward-rotation, coupling-driven sand pump, including the mechanical seal, shaft sleeve, impeller, bearings, oil seals and packing.
| Part Name | Part No. | Qty | Remarks |
|---|---|---|---|
| Pump case, metric | X01173003 | 1 | Imperial X01273002 |
| Impeller, 75 kW, 50 Hz | X01173004 | 1 | 60 Hz X11173004 |
| Mechanical seal | W13110003 | 1 | Primary seal |
| Shaft sleeve | X01173020 | 1 | |
| Bearing | W21157314 | 2 | |
| Bearing | W21156314 | 1 | |
| Oil seal | W12124653 | 3 | |
| Packing | W11311112 | 2 | Auxiliary seal |
| O-ring | W1111550C | 1 | |
| Gland set | X01173018 | 1 | |
| Impeller key | W08021470 | 1 | |
| Shaft sleeve key | W08120625 | 1 |
Qty as per parts list; verify against original drawing.
Data source: Technical data and parts list
Mechanical seal, part no. W13110003. Used as the primary shaft seal. The packing is auxiliary and should only be tightened after the mechanical seal fails.
Shaft sleeve, part no. X01173020. Protects the shaft at the seal area.
Impeller for 75 kW, 50 Hz, part no. X01173004. For 60 Hz, part no. X11173004. Confirm motor power and frequency before ordering.
For XBSY SB6×8J sand pump spare parts, contact HYRIG: info@hyrig.com