HYRIG can supply the XBSY WJQ5×6J shear pump range and its spare parts. The XBSY WJQ5×6J shear pump is a turbine shear pump designed for shearing polymers and clays before they are added to the drilling fluid system.
| Model | Capacity (m³/h) | Head (m) | Speed (r/min) | Efficiency (%) | NPSH (m) | Shaft power (kW) | Motor power (kW) |
|---|---|---|---|---|---|---|---|
| WJQ5×6J-75kW | 150 | 30 | 2150 | 28 | 3 | 46 | 75 |
| WJQ5×6J-55kW | 140 | 26 | 2050 | 28 | 3 | 33 | 55 |
| WJQ5×6J-45kW | 105 | 24 | 1750 | 28 | 2.825 | 45 (verify against original PDF) | 45 |
| WJQ5×6J-37kW | 105 | 24 | 1750 | 28 | 2.825 | 37 (verify against original PDF) | 37 |
Data source: Shear Pump Directions For Installation And Operation, Table 1. The 45kW and 37kW shaft power fields should be verified against the original PDF before ordering.
The WJQ5×6J shear pump adopts a set of mechanical seal for no leakage at the stuffing box. Inside the pump is a 300-series stainless steel turbine containing 44 nozzles, four scoops and a shear plate. Fifty percent of the fluid is sheared twice each time through the pump.
The manual states: "This pump can not be used on active mud system since it will shear drill solids and barite. These solids will also damage pump very quickly." This warning should be observed in all applications.
For XBSY WJQ5×6J shear pump selection and spare parts, contact HYRIG: info@hyrig.com