XMY-22 Digital Pressure Controller | 0-10mA Input

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the XMY-22 digital pressure controller. The XMY-22 receives a 0-10mA signal from a YSG-2 transmitter and provides a digital display along with 2 positional control outputs for alarms or automated processes.
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Model: XMY-22
  • Type: Digital Pressure Controller
  • Input Signal: 0-10mA
  • Matched Instrument: YSG-2 (or YSG-02)
  • Control Mode: 2 positional control
  • Accuracy: 1.0
  • Power Supply: AC 220V

Key Specifications (Model Comparison)

ModelInput SignalControl ModeMatched Instrument
XMY-200-10mANoneYSG-2
XMY-220-10mA2 positional controlYSG-2
XMY-304-20mA2 positional controlYSG-3

Data source: Technical data table

Dimensions (Text-Based)

  • Panel Cutout Dimensions: 152 × 76 mm
  • Overall Dimensions: 160 × 80 × 160 mm
  • Note: For detailed relay output ratings and wiring, please verify with our engineering team.

Structure / Working Principle

The XMY-22 processes the 0-10mA signal and compares it to user-set alarm points. When the pressure exceeds or falls below the set limits, the built-in relays trigger the 2 positional control outputs, which can activate alarms, pumps, or valves.

Cross-Reference & Replacement

Replacing an old controller? Check:

  1. Relay Output: Ensure the control load does not exceed the relay rating.
  2. Set Points: Verify how to adjust the upper and lower alarm limits.
  3. Input: Confirm it matches the 0-10mA sender.

Selection Support

Need a controller for a 4-20mA transmitter? View the XMY-30 Digital Pressure Controller. Explore the full Pressure Transmitters & Digital Instruments series.

Applications

  • Automated control systems
  • Chemical and petrochemical industries
  • Textile and hydraulic systems

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Frequently Asked Questions

Q: Does it have a 24V DC output to power the transmitter?
A: The standard XMY-22 typically requires a separate AC 220V power supply for the transmitter. Please confirm your wiring requirements with our engineers.

Q: What is the typical lead time?
A: Standard configurations typically have a 2-3 week lead time.

Contact

For XMY-22 digital pressure controller selection, contact HYRIG: info@hyrig.com HYRIG is an industrial instrumentation supplier providing pressure gauges, transmitters, and related spare parts to process, oil & gas, and manufacturing operators worldwide.

Page last updated: 2026-10-27

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit