| Model | Input Signal | Matched Instrument | Control Mode |
|---|---|---|---|
| XMY-40 | 0-20mV | YSH-3 / YSH-1 | None |
| XMY-42 | 0-20mV | YSH-3 / YSH-1 | 2 positional control |
| XMY-10 | 3-400 Ω | YTZ-150 | None |
Data source: Technical data table
The XMY-40 receives a 0-20mV voltage signal from the Hall effect transmitter. It amplifies and converts this analog signal into a digital reading on the LED screen, providing a clear readout for operators.
Replacing an old indicator? Check:
Need control/alarm functions? View the XMY-42 Digital Pressure Controller. Explore the full Pressure Transmitters & Digital Instruments series.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Q: Does this come with a pressure sensor?
A: No, it is a display instrument only. It requires the YSH series transmitter to function.
Q: What is the typical lead time?
A: Standard configurations typically have a 2-3 week lead time.
For XMY-40 digital pressure indicator selection, contact HYRIG: info@hyrig.com HYRIG is an industrial instrumentation supplier providing pressure gauges, transmitters, and related spare parts to process, oil & gas, and manufacturing operators worldwide.
Page last updated: 2026-10-27
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.