| Model | Nominal Size | Max Inlet Pressure | Max Flow | Reduction Port |
|---|---|---|---|---|
| ZDR10D | DN10 | 31.5 MPa | 50 L/min | A / B / P |
| ZDR6D Valve | DN6 | 31.5 MPa | 30 L/min | A / P |
Data source: Technical data table.
Text-based mounting parameters for the ZDR10D valve:
| Parameter | Specification |
|---|---|
| Mounting Interface | ISO 4401-05 (CETOP 5) |
| Bolt Pattern | 4 x M6 threaded holes (54 x 54 mm) |
| Port Connections | A, B, P, T (Requires O-ring 12 x 2 mm) |
| Body Height | Approx. 50 mm |
| Max Length | 208 mm (including adjustment knob) |
| Weight | Approx. 2.4 kg |
The valve is normally open. The secondary pressure acts against the spring. When the pressure exceeds the set value, the spool moves to throttle the flow, maintaining constant reduced pressure. An internal relief function protects the secondary side from overpressure. The YM version includes an integral check valve for free reverse flow.
`ZDR10D` + `A/B/P` + `40` + `Y` + `Pressure Range (25/75/150/210)` + `M/YM`.
Used for precise pressure control in branch circuits of machine tools, injection molding machines, and hydraulic power packs.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help choosing between A-port, B-port, or P-port reduction? Contact our engineers with your circuit diagram.
Q: What is the maximum flow rate for the ZDR10D?
A: The maximum flow rate is 50 L/min.
Q: What is the difference between reducing A, B, or P?
A: Reducing A controls pressure in the A line. Reducing B controls pressure in the B line. Reducing P controls the main supply pressure.
Q: What is the function of the Y port?
A: The Y port is used for external drain of the control oil. It must be connected to the tank.
For ZDR10D modular pressure reducing valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.