HYRIG can supply zero emission bellows seal globe valves. The hermetic metal bellows design eliminates dynamic stem sealing, preventing fugitive emissions from escaping into the environment. This makes it a reliable choice for facilities regulated for VOC or hazardous air pollutant emissions.
| Parameter | Standard Packed Valve | Zero Emission Bellows Valve |
|---|---|---|
| Stem Seal Type | Dynamic compression packing | Static metal barrier |
| Fugitive Emissions | Measurable leak rate | Zero leakage at stem passage |
| Maintenance Frequency | Periodic packing tightening | No packing adjustment required |
| Environmental Compliance | Risk of non-compliance | Supports fugitive emission reduction |
| Operating Life | Packing degrades over time | Bellows fatigue life depends on cycles |
| Dimension | Standard |
|---|---|
| Face-to-Face | ASTM B16.10 |
| Flange Dimensions | ASME B16.5 |
| Design Construction | BS 1873 |
The valve achieves zero emission through its structural design. The multi-ply metal bellows is welded to both the valve stem and the bonnet, creating a static, hermetic barrier. The rising stem moves axially within the bellows, but the media never contacts the dynamic packing area.
Above the bellows, flexible graphite packing provides a secondary seal in case of bellows failure. When the valve is fully open, a backseat engages the bonnet to provide a third layer of protection. This triple-layer design ensures that even under abnormal conditions, leakage is minimized until the valve can be serviced.
When replacing a standard packed valve with a zero emission bellows valve:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Q: What causes fugitive emissions in a standard valve?
In a standard valve, the dynamic stem packing relies on compression to seal. Over time, thermal cycling and wear cause the packing to degrade, allowing media to leak into the atmosphere.
Q: Does the bellows completely eliminate leaks?
The metal bellows eliminates leaks from the dynamic stem passage. The static gaskets and flange connections must also be properly sealed to prevent leaks.
Q: Can I retrofit a standard valve with a bellows?
Retrofitting is generally not possible because the bonnet, stem, and body dimensions are specifically designed for the bellows assembly. Complete valve replacement is required.
Q: What is the typical lead time for zero emission valves?
Standard lead time is typically 4 to 6 weeks depending on the material and size.
To select the correct zero emission valve for your environmental compliance requirements, provide the medium, operating pressure, and temperature. Our engineers will confirm the appropriate bellows material and pressure class.
For zero emission bellows seal globe valve selection, contact HYRIG: info@hyrig.com