ZQ127/25Y TEDA Drill Pipe Power Tong – Duplex Gear Assembly Components

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The ZQ127/25Y TEDA Duplex Gear Assembly comprises 11 component types that form a critical part of the dual-speed transmission system. Key parts include the Duplex Gear (ZQ25.1.4-1), Duplex Shaft (ZQ25.1.4-5), Idler (ZQ25.1.4-4), 60 Rollers (Φ10×30), 4 Seal Rings, 4 O-rings 63×5.7, Locating Disc, Oil Cup M10×1, Shim, and Shaft Sleeve. This assembly enables smooth gear shifting and efficient power transmission between the motor and the tong head.

Conatct For Details
DetailReview(0)Additional

The duplex gear assembly is a key transmission component in the ZQ127/25Y TEDA master tong, forming the core of the dual‑speed gear system that allows operators to select between high‑gear and low‑gear operation. This assembly consists of a duplex (two‑stage) gear mounted on a dedicated shaft, supported by roller bearings and sealed to retain lubrication. Proper maintenance of this assembly ensures smooth gear shifting and efficient power transmission across both speed ranges.

Hexagon Socket Head Cap Screw M6×10 (Item 1 – Purchase No. ZQ25-87, Part No. GB70, quantity 1): A socket head cap screw securing the locating disc or other retaining components. Torque to specification.

Locating Disc (Item 2 – Purchase No. ZQ25-86, Part No. XYQ3C.Z-5, quantity 1): The locating disc positions the duplex shaft axially within the transmission housing, preventing end‑float and maintaining correct gear mesh alignment. It acts as a thrust surface for the assembly. Inspect for wear on the contact face.

Idler (2) (Item 3 – Purchase No. ZQ25-84, Part No. ZQ25.1.4-4, quantity 1): The idler gear meshes with the duplex gear to transmit power to the next stage of the transmission. It ensures correct rotation direction and speed reduction. Gear teeth should be inspected for wear, pitting, or chipping – replace if damaged.

Seal Ring (1) (Item 4 – Purchase No. ZQ25-76, Part No. ZQ25.1.3-2, quantity 4): Four seal rings retain lubricating grease within the bearing cavities while preventing contaminants from entering. They provide dynamic sealing around rotating components. Always replace seals during overhaul.

O-ring 63×5.7 (Item 5 – Purchase No. ZQ25-77, Part No. GB1235-76, quantity 4): Four O‑rings provide static sealing between the shaft sleeve, housing, and other mating surfaces. They prevent grease leakage and maintain a clean bearing environment. Replace O‑rings every time the assembly is disassembled.

Oil Cup M10×1 (Item 6 – Purchase No. ZQ25-29, Part No. GB1152, quantity 1): The oil cup provides a convenient lubrication point for the duplex gear assembly. Grease can be injected through the cup to lubricate the rollers and gears without disassembling the tong. Ensure the oil cup is clean and functional.

Duplex Shaft (Item 7 – Purchase No. ZQ25-85, Part No. ZQ25.1.4-5, quantity 1): The duplex shaft supports the duplex gear and transfers rotational motion through the transmission. It is a precision‑machined component that must remain straight and true. The shaft provides the bearing surface for the 60 rollers. Check for scoring or wear on the shaft journals – replace if out of tolerance.

Roller Φ10×30 (Item 8 – Purchase No. ZQ25-78, quantity 60): Sixty cylindrical roller bearings measuring 10mm diameter by 30mm length. These rollers support the duplex gear on the duplex shaft, reducing friction and allowing smooth rotation under high torque loads. The rollers are distributed around the shaft to evenly carry the load. Inspect for flat spots, scoring, or diameter reduction – replace all rollers as a set when servicing.

Shim (Item 9 – Purchase No. ZQ25-83, Part No. ZQ25.1.4-3, quantity 1): The shim adjusts the axial clearance of the duplex gear assembly, ensuring proper preload and gear engagement. Correct shim thickness is critical for smooth shifting and reduced gear noise. Use only the specified shim.

Shaft Sleeve (2) (Item 10 – Purchase No. ZQ25-82, Part No. ZQ25.1.4-2, quantity 1): The shaft sleeve provides a wear‑resistant bearing surface between the duplex gear and the duplex shaft. It protects the shaft from direct contact and is a consumable component. Replace the sleeve when wear is evident.

Duplex Gear (1) (Item 11 – Purchase No. ZQ25-81, Part No. ZQ25.1.4-1, quantity 1): The duplex gear is a two‑stage gear with different tooth counts on each stage. One stage engages with the drive gear for high‑speed operation, while the other engages for low‑speed, high‑torque operation. This design enables the dual‑speed functionality of the master tong. Inspect the gear teeth for wear, pitting, or chipping – replace if any teeth show significant damage.

Duplex Gear Assembly Operation

  1. Power enters the duplex shaft (Item 7) from the drive gear train.

  2. The duplex gear (Item 11) provides two‑stage speed reduction.

  3. Rollers (Item 8) and shaft sleeve (Item 10) provide bearing surfaces for smooth rotation.

  4. The idler (Item 3) transmits power to the next transmission stage.

  5. Seal rings (Item 4) and O‑rings (Item 5) retain lubrication.

  6. The locating disc (Item 2) prevents axial movement.

  7. The shim (Item 9) maintains proper preload.

  8. The oil cup (Item 6) allows regular lubrication.

Maintenance and Inspection Points

  • Disassemble systematically – keep all 60 rollers organized and count them to ensure none are lost. Rollers should be inspected individually.

  • Clean thoroughly – remove all old grease and debris from the duplex gear, duplex shaft, and housing using diesel fuel or solvent.

  • Inspect gear teeth – check both stages of the duplex gear for uneven wear, pitting, or chipping. Replace the gear if any damage is found.

  • Measure shaft dimensions – use a micrometer to check the duplex shaft for wear. Replace if journals are worn beyond specification.

  • Check rollers and sleeve – inspect all 60 rollers for flat spots or damage. Replace the shaft sleeve if it shows wear.

  • Replace seals and O‑rings – always use new seal rings and O‑rings to prevent leakage and contamination.

  • Lubricate during assembly – apply high‑quality grease to all bearing surfaces and gears before reassembly. Use the oil cup for post‑assembly lubrication.

  • Check axial play – after assembly, verify correct shim thickness to achieve proper gear mesh without excessive end‑float.

  • Test operation – rotate the duplex gear by hand to confirm smooth, binding‑free rotation before installing into the transmission.

Reassembly Sequence

  1. Install O‑rings into housing grooves.

  2. Place the shaft sleeve onto the duplex shaft.

  3. Position the 60 rollers around the shaft sleeve, ensuring even spacing.

  4. Slide the duplex gear over the rollers and shaft sleeve.

  5. Install seal rings at both ends to retain grease.

  6. Position the locating disc and secure with the socket head cap screw.

  7. Insert the shim to achieve correct axial clearance.

  8. Install the idler gear.

  9. Rotate the assembly to verify smooth operation.

  10. Lubricate through the oil cup after final assembly.

Ordering and Replacement Guidance

When ordering components for the duplex gear assembly, always reference both the Purchase No. and Part No. to ensure correct specification. The duplex gear (ZQ25-81) and duplex shaft (ZQ25-85) are the primary working components. All rollers (ZQ25-78) should be replaced as a set. Seal rings (ZQ25-76) and O‑rings (ZQ25-77) should be replaced during every major overhaul.

For assistance with part identification, assembly guidance, or to place an order for any ZQ127/25Y TEDA duplex gear assembly component, please contact us via email at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit