The ZQ203/125 is the ultimate high‑torque member of the ZQ203 series – an open‑type, hydraulic‑pneumatic combined drive drill pipe power tong featuring internal ramp clamping and a reinforced frame. With a low‑gear rated torque of 125 kN·m (125,000 N·m), it delivers 25% more breakout power than the ZQ203/100 and 67% more than the ZQ203/75X. This tong is purpose‑built for ultra‑deep wells, high‑pressure high‑temperature (HPHT) environments, high‑grade pipe (V150, S135), and the most difficult stuck, rusted, or galled connections that lesser tongs cannot break.
Model Decoding (Per SY/T 5074 & API 7K):
ZQ – Drill pipe power tong (differentiates from XQ workover tong or TQ casing tong)
203 – Maximum pipe OD: 203 mm (8″)
125 – Low gear rated torque: 125 kN·m (125,000 N·m)
No suffix – Internal ramp clamping, open‑type, hydraulic‑pneumatic combined drive
Key Technical Specifications:
| Parameter | Low Gear (Breakout) | High Gear (Make‑up / Spinning) |
|---|---|---|
| Torque (rated) | 125,000 N·m (125 kN·m) | 7,000 N·m (7 kN·m) |
| Speed | ≈2.7 r/min | ≈40 r/min |
| Working Pressure – Hydraulic | 20.7 MPa (higher than ZQ203/100) | 20.7 MPa |
| Working Pressure – Pneumatic | 0.5–0.9 MPa | 0.5–0.9 MPa |
| Flow Rate (hydraulic) | ≥114 L/min | ≥114 L/min |
| Applicable Pipe OD | Φ114–203 mm (4½″ – 8″) | Same |
| Pipe Types | Drill pipe, drill collar, casing, heavy weight drill pipe | Same |
| Jaw Type | Internal ramp clamping – synchronous grip, easy die replacement | |
| Structure | Open‑type (quick pipe engagement without lifting) + reinforced frame & safety door | |
| Drive | Hydraulic (rotation) + pneumatic (clamping/shifting) – on‑the‑fly gear shifting with pneumatic clutch | |
| Weight (main + backup tong) | 2650 kg | |
| Dimensions (L×W×H) | 1760×1080×1360 mm | |
| Standards | API Spec 7K, SY/T 5074 |
Core Features & Advantages (Why Search for ZQ203/125?):
125 kN·m Extreme Breakout Torque – Conquer the Impossible
With 125,000 N·m of low‑gear torque, the ZQ203/125 breaks stuck threads, severely rusted connections, galling, and over‑torqued make‑ups that other power tongs cannot handle. It is the tool of choice for ultra‑deep wells, HPHT wells, and high‑grade pipe (V150, S135).
Reinforced Frame & Safety Door – No Deformation Under Extreme Load
At 125 kN·m, ordinary tong frames can twist or deform. The ZQ203/125 features an enhanced, reinforced frame and a heavy‑duty safety door that maintains rigidity and prevents pipe slippage or bending. This ensures consistent performance and operator safety.
Internal Ramp Clamping – Proven Reliability for Extreme Torque
The internal ramp jaw system provides synchronous, self‑centering grip. While planetary jaws offer higher centering precision, internal ramp clamping delivers more stable torque transmission under extreme loads – exactly what you need for the toughest breakouts. Dies are easily replaceable for different pipe sizes.
Hydraulic-Pneumatic Combined Drive + On-the-Fly Shifting
Hydraulic rotation combined with pneumatic clamping and gear shifting allows the operator to change between high and low gear without stopping the tong. The pneumatic clutch enables smooth, instant shifting. Hydraulic lift and pneumatic cylinder movement reduce manual handling, improving rig floor safety.
Integrated Main & Backup Tong – Complete Make/Break Solution
The tong body integrates the main (rotating) tong and backup (holding) tong. The backup secures the lower pipe string while the main tong applies torque to the connection – eliminating pipe twist and protecting threads. Replaces catheads, manual tongs, and spinning ropes.
Applications:
Onshore & offshore ultra‑deep wells, complex structure wells, HPHT wells
Making up and breaking out 4½″ – 8″ drill pipe, drill collars, casing, heavy weight drill pipe
Extreme torque removal of the most difficult stuck, rusted, over‑torqued, or galled connections
High‑grade steel pipe (V150, S135, etc.) and extreme make‑up torque requirements
ZQ203 Series Core Comparison (Same 8″ Max OD, Different Torque Levels):
| Model | Low Gear Torque (kN·m) | Clamping Type | Applicable OD | Weight (kg) | Core Positioning |
|---|---|---|---|---|---|
| ZQ203/75X | 75 | Planetary jaw (X) | 5½″ – 8″ | 1500 | Lightweight, thread protection, standard large diameter |
| ZQ203/100 | 100 | Internal ramp | 3½″ – 8″ | 2400 | Full range (3½″–8″), high torque, general stuck threads |
| ZQ203/125 | 125 | Internal ramp | 4½″ – 8″ | 2650 | Extreme torque – ultra‑deep wells / most difficult stuck threads |
Selection Guide:
Choose ZQ203/125 if you need: 125 kN·m extreme torque, ultra‑deep or HPHT wells, 4½″–8″ large pipe, and the ability to break the most stubborn stuck/dead threads.
Choose ZQ203/100 if you need full 3½″–8″ range with high torque (100 kN·m) for general stuck thread work.
Choose ZQ203/75X if you work only with 5½″–8″, prioritize thread protection (planetary jaw), lighter weight, and smaller rig floor space.
Contact Us
For detailed technical specifications, pricing, spare parts, or to order the ZQ203/125 extreme‑torque power tong or any other model in the ZQ203 series, please contact:
Email: info@hyrig.com
TEDA – Your reliable partner for hydraulic power tongs and oilfield equipment from sucker rods to extreme‑torque large casing tongs.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.