Drill Winch Spare Part | LANZHOU LS-NOW
Precision wear component | API 7K compliant
The 106.16.36.02 outer gear bushing is a machined sleeve that provides a replaceable bearing surface for rotating gears in the ZJ70DS drawworks. It is manufactured from a proprietary anti-galling copper alloy to ensure reliable operation under intermittent high-torque conditions.
| Parameter | Details |
|---|---|
| Part number | 106.16.36.02 |
| Component name | Outer gear bushing |
| Material | Copper alloy (CuSn or equivalent) |
| Tolerance class | IT6 |
| Hardness (HB) | 80–120 (typical) |
| Surface roughness | Ra ≤ 0.8 µm |
| Compliance | API SPEC 7K |
Smooth rotation – Optimized surface finish reduces friction.
Corrosion resistant – Suitable for lubricated environments.
Easy to install – Press-fit or slip-fit as per original design.
Cost-effective – Extends gear and shaft life by concentrating wear on the bushing.
ZJ70DS drawworks gear train. This bushing is commonly used on intermediate shaft gears. Replace during routine gearbox inspection if wear exceeds 0.1 mm on ID.
100% dimensional inspection
Material certification
Surface finish verification
API 7K documentation
Part number: 106.16.36.02
Lead time: Please inquire
Contact: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.