Drill Winch Spare Part | LANZHOU LS-NOW
Precision wear component | API 7K compliant
The 106.16.37.04 outer gear bushing is a precision sleeve installed between a gear bore and its mounting shaft within the ZJ70DS drawworks gear train. It provides a durable, low-friction bearing surface, absorbs radial loads, and protects the shaft from wear.
| Parameter | Details |
|---|---|
| Part number | 106.16.37.04 |
| Component name | Outer gear bushing |
| Material | High-grade copper alloy (anti-galling) |
| Hardness | Uniform, wear-resistant |
| Machining tolerance | IT6 |
| Surface finish | Precision ground ID and OD |
| Compliance | API SPEC 7K |
Wear-resistant material – Copper alloy composition minimizes friction and prevents seizure under high loads.
Precision dimensions – IT6 tolerance ensures proper fit without modification.
Anti-galling properties – Reduces risk of shaft damage during gear rotation.
Long service life – Extends overhaul intervals compared to standard bushings.
This bushing is used in the ZJ70DS drawworks (7000m AC VFD rig) gearbox. Typical positions include gear-to-shaft interfaces where relative motion occurs. Replace when measured clearance exceeds recommended limits.
Each 106.16.37.04 outer gear bushing undergoes:
Chemical composition verification
Hardness testing
Dimensional inspection (ID, OD, length) with certified gauges
Visual and surface finish inspection
All parts are documented and traceable per API SPEC 7K.
Part number: 106.16.37.04
Description: Outer gear bushing for ZJ70DS drawworks
Packaging: Anti-rust coated, individually bagged
For technical drawings or a quotation, please contact:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.