Drill Winch Spare Part for ZJ70DS | LANZHOU LS-NOW
Precision engineering | API 7K compliant | Direct fit
The 106.16.37.00 shaft assembly is a power transmission component designed specifically for the ZJ70DS drilling drawworks. As the primary input shaft, it receives torque from the drive motors and transmits it to the intermediate shaft and drum through the chain drive or gear train. This part is manufactured to original LS-NOW specifications, ensuring a precise fit and reliable performance in demanding deep-well drilling operations.
| Parameter | Details |
|---|---|
| Part number | 106.16.37.00 |
| Component name | Shaft assembly |
| Application | ZJ70DS drawworks (AC variable frequency electric drilling rig, 7000m class) |
| Material | High-strength alloy steel forging |
| Heat treatment | Quenching and tempering + surface hardening |
| Machining accuracy | IT6 grade or better |
| Surface finish | Precision ground on all bearing and seal journals |
| Balance | Dynamic balanced to ISO G6.3 |
| Compliance | API SPEC 7K |
Heavy-duty construction – Forged from high-strength alloy steel for superior fatigue life under cyclic hoisting loads.
Precision machining – Critical diameters and splines machined to tight tolerances for perfect fit with bearings, gears, and couplings.
Heat-treated – Optimized core toughness and surface hardness to resist wear and shock loading.
Dynamic balancing – Ensures smooth operation at rated speeds, reducing vibration and extending bearing life.
100% interchangeable – Direct fit without any modification to the drawworks.
This shaft assembly is a direct-fit component for:
ZJ70DS drilling rig (7000m AC VFD rig)
Compatible with other rigs using LS-NOW drawworks of similar series (part number verification recommended)
Typical position: Power input shaft connecting the motor coupling to the main transmission chain or gearbox.
Each 106.16.37.00 shaft assembly undergoes:
Chemical composition verification
Mechanical property testing (tensile, impact, hardness)
Magnetic particle inspection (MPI) for surface cracks
Ultrasonic testing (UT) for internal soundness
Dimensional inspection with CMM
Dynamic balancing report
All tests are documented and traceable per API SPEC 7K requirements.
Original design data – Manufactured directly from LS-NOW engineering drawings.
No adaptation needed – Precisely matches the mounting dimensions, spline profile, and thread specifications.
Fast availability – Shorter lead times compared to full drawworks production.
Technical support – Installation guidance and torque specifications available upon request.
| Inspection Point | Recommended Action |
|---|---|
| Bearing journal wear | Measure diameter at each major overhaul |
| Spline condition | Check for deformation or fretting every 2000 operating hours |
| Threads for retaining nuts | Inspect for damage before reassembly |
Replace the 106.16.37.00 shaft assembly if scoring, fatigue cracks, or significant wear is detected.
Part number: 106.16.37.00
Description: Shaft assembly for ZJ70DS drawworks
Packaging: Anti-rust coated + wooden crate with foam support
Lead time: Please inquire with current stock status
For technical drawings, installation torque values, or a quotation, please contact:
info@hyrig.com
*LANZHOU LS-NOW – Precision power transmission for your ZJ70DS drawworks.*
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.