106.16.40.00 Intermediate Shaft Assembly for ZJ70DS Drawworks

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
106.16.40.00 intermediate shaft assembly is a key torque transfer component in ZJ70DS drawworks. Located between active shaft and drum drive, it carries gears and bearings. Manufactured from alloy steel forging, heat-treated, dynamically balanced. API SPEC 7K compliant.

Conatct For Details
DetailReview(0)Additional

Drill Winch Spare Part for ZJ70DS | LANZHOU LS-NOW

Product Overview

The 106.16.40.00 intermediate shaft assembly is a secondary power transmission shaft in the ZJ70DS drawworks gear train. It transfers torque from the input shaft to the final drum drive while supporting one or more reduction gears.

Technical Specifications

ParameterDetails
Part number106.16.40.00
Component nameIntermediate shaft assembly
MaterialAlloy steel forging (AISI 4140 or equivalent)
Heat treatmentThrough-hardened + induction hardened journals
Surface finishGround bearing seats
BalanceDynamic balanced
ComplianceAPI SPEC 7K

Key Features

  • High-strength forged construction

  • Precision-machined gear and bearing seats

  • Suitable for high-cycle hoisting loads

  • Direct fit without modification

Application

ZJ70DS drawworks (7000m AC VFD rig). Also fits other LS-NOW drawworks using the same intermediate shaft layout (verify part number).

Quality Assurance

Full material traceability, NDT (MPI/UT), dimensional inspection, and dynamic balancing per API 7K.

Ordering

Part number: 106.16.40.00
Contact: info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit