The AZ Casing Spear is a heavy-duty, internally engaging fishing tool specifically engineered for the challenging task of recovering stuck or lost casing strings. It is designed to latch onto the internal diameter (ID) of the fish using powerful, hardened slips that provide an immense gripping surface.
The primary function of this tool is to provide a secure and strong connection to the fish, allowing operators to apply maximum pulling force or to transmit intense jarring impacts to free the stuck pipe. Its robust construction ensures integrity under extreme loads.
A key feature of its design is operational versatility. It can be used as a standalone spear for straightforward recovery or can be configured with a cutting tool below it. This innovative setup allows for a combined operation: cutting the casing and then immediately fishing the cut section in a single trip downhole, which is a significant efficiency breakthrough.
Finally, the tool incorporates a fail-safe release function. If the fish cannot be mobilized, the spear can be disengaged downhole, ensuring the valuable toolstring is not sacrificed, thus minimizing further losses and non-productive time.
| Mandrel OD (mm / inch) | Mandrel ID (mm / inch) | Casing Size (mm / inch) | Connection |
|---|---|---|---|
| 146 (5-3/4) | 38.1 (1-1/2) | 177.8 (7) | NC38 |
| 210 (8-17/64) | 50.8 (2) | 244.5 (9-5/8) | 4-1/2 REG |
| 299 (11-49/64) | 71.4 (2-13/16) | 339.7 (13-3/8) | NC50 |
| 299 (11-49/64) | 71.4 (2-13/16) | 473.1 (18-5/8) | 6-5/8 REG |
| 299 (11-49/64) | 71.4 (2-13/16) | 508.0 (20) | 6-5/8 REG |
Note: Specifications are subject to standard manufacturing tolerances. The mandrel ID refers to the through-bore of the tool. Always confirm the internal diameter of the fish for correct tool selection.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.