The Reverse Circulating Junk Basket is a specialized fishing tool designed for the efficient retrieval of small metallic debris and junk from the bottom of a well. It operates on a simple yet highly effective fluid dynamics principle: reversing the normal flow path of the drilling fluid at the bottom of the hole.
During operation, drilling fluid is pumped down the annulus. The tool forces this fluid to reverse direction at the bottom, creating a localized, high-velocity upward flow through its central body and into the drill pipe. This reversed flow sweeps across the wellbore floor, entraining any loose junk and carrying it up into the tool's internal collection basket or barrel. A check valve (such as a ball) seals the pathway once circulation stops, preventing the captured debris from falling back out.
It is the preferred method for collecting all types of small junk, including broken bit teeth, bearings, milled fragments, and lost hand tools. Its non-aggressive nature makes it ideal for cleaning out wellbores without damaging the existing casing or open hole, ensuring a clean wellbore for subsequent operations.
| Body OD (mm/in) | Ball OD (mm/in) | Mill Shoe OD (mm/in) | Recommended Hole Size (mm/in) | Max Catch Size (mm/in) | Connection |
|---|---|---|---|---|---|
| 102 (4) | 108 (4-1/4) | 66 (2-3/5) | 101.6 (4) ~ 114.3 (4-1/2) | 32 (1-1/4) | NC26 |
| 114 (4-1/2) | 120 (4-3/4) | 80 (3-1/8) | 123.8 (4-7/8) ~ 127 (5) | 32 (1-1/4) | 2-7/8 REG |
| 121 (4-3/4) | 127 (5) | 80 (3-1/8) | 130 (5-1/8) ~ 139.7 (5-1/2) | 32 (1-1/4) | 3-1/2 REG |
| 130 (5-1/8) | 135 (5-5/16) | 96.5 (3-13/16) | 155.6 (6-1/8) ~ 165.1 (6-1/2) | 32 (1-1/4) | NC31 |
| 146 (5-3/4) | 151 (5-15/16) | 108 (4-1/4) | 155.6 (6-1/8) ~ 165.1 (6-1/2) | 35 (1-3/8) | NC38 |
| 165 (6-1/2) | 171 (6-3/4) | 124 (4-14/16) | 212.7 (8-3/8) ~ 241.3 (9-1/2) | 40 (1-9/16) | 4-1/2 REG |
| 178 (7) | 184 (7-1/4) | 131 (5-3/16) | 212.7 (8-3/8) ~ 241.3 (9-1/2) | 43 (1-11/16) | NC50 |
| 200 (7-7/8) | 205 (8-1/16) | 157 (6-3/16) | 212.7 (8-3/8) ~ 241.3 (9-1/2) | 43 (1-11/16) | NC50 |
| 232 (9-1/8) | 237 (9-5/16) | 179 (7-1/16) | 273 (10-3/4) ~ 295.3 (11-5/8) | 48 (1-57/64) | 6-5/8 REG |
| 257 (10-1/8) | 263 (10-3/8) | 200 (7-7/8) | 273 (10-3/4) ~ 295.3 (11-5/8) | 48 (1-57/64) | 6-5/8 REG |
| 286 (11-1/4) | 291 (11-7/16) | 220 (8-11/16) | 298.5 (11-3/4) ~ 311.2 (12-1/4) | 48 (1-57/64) | 6-5/8 REG |
| 350 (13-1/8) | 356 (14) | 280 (11-1/16) | 406.4 (16) ~ 444.5 (17-1/2) | 60 (2-23/64) | 6-5/8 REG |
| 381 (15) | 387 (15-1/4) | 300 (11-13/16) | 406.4 (16) ~ 444.5 (17-1/2) | 60 (2-23/64) | 7-5/8 REG |
Note: Specifications are subject to standard manufacturing tolerances. The "Max Catch Size" refers to the largest single piece of debris the basket can physically ingest. "Recommended Hole Size" indicates the appropriate hole or casing ID for optimal performance of that specific tool OD.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.