The Die Collar is a specialized external fishing tool used to engage and retrieve lost or stuck equipment by cutting a thread onto its outer diameter (OD). It is the external solution to fishing problems where internal access is impossible or impractical.
This tool is designed for two main scenarios: first, for tubular fish (like drill pipe or tubing) that have a damaged, collapsed, or otherwise inaccessible internal bore; and second, for retrieving solid cylindrical junk that has no internal bore at all, such as a bit cone, a dropped tool, or a sealed bearing assembly.
The tool contains internal, hardened cutting threads. As the Die Collar is carefully rotated over the fish, these threads cut a precise, strong connection onto the fish's OD. This creates a secure, positive mechanical grip. A key feature is its compatibility with both right-hand and left-hand drill pipe strings, allowing it to be used for direct pulling or for applying left-hand torque in back-off operations to unscrew stuck pipe downhole. It is a fundamental tool for handling a wide range of external fishing challenges.
(Note: The provided text did not include a specific parameter table. The following is a generalized example of how such a table is typically structured for Die Collars, based on standard industry sizes and the principle of the tool.)
| Fish OD (mm / inch) | Die Collar ID (mm / inch) | Connection Type | Thread Type |
|---|---|---|---|
| 60 - 73 (2.36 - 2.87) | 70 (2-3/4) | 2-3/8 REG | API Taper |
| 73 - 89 (2.87 - 3.50) | 95 (3-3/4) | NC31 | API Taper |
| 89 - 114 (3.50 - 4.49) | 105 (4-1/8) | NC38 | API Taper |
| 114 - 140 (4.49 - 5.51) | 121 (4-3/4) | NC40 | API Taper |
| 140 - 178 (5.51 - 7.01) | 146 (5-3/4) | 4-1/2 REG | API Taper |
| 178 - 219 (7.01 - 8.62) | 197 (7-3/4) | NC50 | API Taper |
| 219 - 244 (8.62 - 9.61) | 248 (9-3/4) | 6-5/8 REG | API Taper |
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.