Impression block

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The Impression Block is a critical first-step diagnostic tool in fishing operations, designed to save immense time and cost by eliminating guesswork. Its sole purpose is to accurately record the physical configuration and depth of a fish top (a lost or stuck item) downhole. By lowering the tool and gently pressing its soft, malleable lead or composite pad onto the fish, it creates a precise, negative impression or "mold." This reveals vital details like the fish's condition (bent, parted, collapsed), its exact orientation, and its precise depth. This intelligence is invaluable, allowing engineers to confidently select the perfect fishing tool (e.g., overshot, spear, tap) for the job on the first attempt, drastically increasing success rates and avoiding multiple, costly trips. It is the essential tool for planning a successful and efficient fishing operation.
Conatct For Details
DetailReview(0)Additional

Product Introduction

The Impression Block is a diagnostic and profiling tool used at the very beginning of a fishing operation to gather crucial information about the top of a fish lost in the wellbore. Its function is to create a physical impression of the fish's top, providing a clear picture of its condition and exact position.

The tool consists of a sturdy mandrel with a connection on top and a replaceable, soft lead or composite pad on the bottom. It is run carefully into the well on a drill string until it makes gentle contact with the top of the fish. A controlled amount of weight is applied, causing the soft pad to deform and mold itself around the fish's top.

When retrieved, the pad carries a detailed, three-dimensional negative impression of the fish. This impression reveals critical information such as whether the top is square or tapered, bent or straight, cracked or collapsed, and its exact depth. This data is fundamental for engineers to make an informed decision on the best fishing tool and strategy to employ, ensuring the highest chance of a successful recovery.


Technical Specifications: Impression Block

Tool OD (mm / inch)Tool ID (mm / inch)Overall Length (m / ft)Connection
105 (4-1/8)15 (19/32)0.36 (1.18)2-3/8 REG
127 (5)20 (25/32)0.38 (1.24)3-1/2 REG
130 (5-1/8)30 (1-3/16)0.38 (1.24)NC38
168 (6-5/8)30 (1-3/16)0.40 (1.31)NC50
206 (8-7/64)30 (1-3/16)0.42 (1.38)NC50
406 (16)50 (1-31/32)0.56 (1.84)6-5/8 REG

Note: Specifications are subject to standard manufacturing tolerances. The Tool ID refers to the through-bore of the mandrel. The soft impression pad (not listed in dimensions) is attached to the bottom. The appropriate tool size is selected based on the wellbore or casing ID.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit