The Back Off Sub, also known as a Back Off Spear, is a critical safety and fishing tool integrated into the bottom hole assembly (BHA). Its primary function is to provide a reliable and predetermined point of separation if the drill string becomes stuck.
Unlike reactive methods that require intervention after a pipe is stuck, the Back Off Sub is a proactive solution. It is designed with a specific, engineered thread connection that allows the drill string to be intentionally disconnected ("backed off") at the sub's location when right-hand torque and overpull are applied. This enables the recovery of the entire upper section of the drill string, leaving only the targeted section downhole for a focused fishing operation. It effectively replaces the need for more complex and less reliable methods like using a taper tap or attempting a blind back-off on standard tool joints.
Back Off Sub - Technical Specifications
| OD (mm) | OD (inch) | ID (mm) | ID (inch) | OAL (mm) | OAL (ft) | Connection (Box × Pin) |
|---|---|---|---|---|---|---|
| 105 | 4 1/8 | 15 | 19/32 | 580 | 1.9 | NC31LH Box × NC31 Pin |
| 121 | 4 3/4 | 22 | 55/64 | 628 | 2.1 | NC38LH Box × NC38 Pin |
| 159 | 6 1/4 | 28 | 1-7/64 | 690 | 2.3 | NC46LH Box × NC46 Pin |
| 165 | 6 1/2 | 28 | 1-7/64 | 690 | 2.3 | NC50LH Box × NC50 Pin |
| 168 | 6 5/8 | 28 | 1-7/64 | 690 | 2.3 | NC50LH Box × NC50 Pin |
| 178 | 7 | 32 | 1 1/4 | 700 | 2.3 | 5-1/2 FH LH Box × 5-1/2 FH Pin |
| 203 | 8 | 35 | 1 3/8 | 723 | 2.4 | 6-5/8 REG LH Box × 6-5/8 REG Pin |
Note: LH = Left-Hand Thread
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.