The Full Opening Safety Valve is a manually operated valve designed as an integral component of the drill string circulating system. It serves as a vital safety tool to proactively prevent blowouts and protect personnel and equipment during drilling operations.
This valve is typically connected between drill pipes as a standard safety measure. Its primary function is to be quickly closed to seal the drill string, effectively containing well pressure and controlling a potential kick before it escalates. The valve is engineered for fast action; using its special dedicated wrench, a simple 90-degree rotation is all that is required to achieve a fully open or fully closed position.
A key operational best practice is to install the Full Opening Safety Valve whenever drill pipes are being lifted or as a precautionary measure before the kelly is raised. Its full-bore design ensures minimal pressure drop and allows for efficient fluid circulation when open.
Technical Specifications:
| Outer Diameter (OD) | Inner Diameter (ID) | API Connection |
|---|---|---|
| 79.4 mm (3-1/8 inch) | 20 mm (51/64 inch) | 2-7/8 HT PAC |
| 89 mm (3-1/2 inch) | 30 mm (1-3/16 inch) | NC26 |
| 111 mm (4-3/8 inch) | 40 mm (1-37/64 inch) | NC31 |
| 121 mm (4-3/4 inch) | 50.8 mm (2 inch) | NC38 |
| 127 mm (5 inch) | 50.8 mm (2 inch) | NC38 |
| 133.4 mm (5-1/4 inch) | 50.8 mm (2 inch) | NC40 |
| 159 mm (6-1/4 inch) | 71.4 mm (2-13/16 in) | NC46 |
| 165 mm (6-1/2 inch) | 71.4 mm (2-13/16 in) | NC50 |
| 168 mm (6-5/8 inch) | 71.4 mm (2-13/16 in) | NC50 |
| 190 mm (7-1/2 inch) | 76.2 mm (3 inch) | 5-1/2 FH |
| 235 mm (9-1/4 inch) | 108 mm (4-1/4 inch) | XT54 |
| No. | Description |
|---|---|
| 1 | FULL OPEN SAFETY VALVE 3-1/2" X 5000 PSI/EUE PIN-BOX |
| 2 | MAJOR REPAIR KIT FULL OPEN SAFETY VALVE 3-1/2" X 5000 PSI/EUE PIN-BOX |
| 3 | FULL OPENING SAFETY VALVE 2-7/8" EUE PIN X BOX manufacture TIANHE |
| 4 | IBOP 4-1/2 IF WP 10K INSIDE BLOWOUT PREVENTOR W/ RELEASING HEAD, STANDARD SERVICE, 10,000 PSI WP, 15,000 PSI TP Range 25-31 IN OAL Range 6.5 – 6.625IN OD X 1.950 ID, 4-1/2 IF (NC50) BOX, 6.078 BEVEL DIA X 4-1/2 IF (NC50) PIN, 6.078 BEVEL DIA STANDARD TWO PIECE |
| 5 | KING SWIVEL 4,5" Circulating Head Model 5SC Working Pressure 6000 psi at 20 rpm Top connection 4” API Line Pipe (LP) c/w Top Plug 4” LP Hose connection Integral 3” Fig 1502 Male Lower connection 4-1/2 IF |
| 6 | Full Open Safety Valve (FOSV) Conn. NC 50.Pin x Box Working Pressure 5.000 Psi c/w Key Stick and Certification API-7-1 |
| 7 | Full Open Safety Valve (FOSV) Conn. NC 50.Pin x Box Working Pressure 10000 Psi c/w Key Stick and Certification API-7-1 |
| 8 | Full Opening Safety Valve 4-1/2" OD x 2" ID x 26" L Operating : Min 5000 Psi Connection 2 7/8" IF C/w X-over 2 3/8" IF pin x 2 7/8" IF Box |
| 9 | Sub 6-5/8 "Reg Box x 4-1/2" RegQuantity: 3 piecesSafety sub (to square) lower 6-5/8 "Reg Box x 4-1/2" IF Pin. Safety sub (onsquare) lower with a pressure of 10,000 PSI. GOST 7360-2015.Thread: 6-5/8 "Reg Box x 4-1/2" IF Pin.API RP Standard 7G Grade G-105 Grade MOutside diameter: 6-5/8. "Length 600 mm.The passageway is 70 mm. |
| 10 | Translator 8 "Reg Box x 12-1/4" RegQuantity: 2 piecesAbove the bit sub for the 8 "TBS to the 12-1/4" bits with an operating pressure of 10,000 PSI, it is bored under the check valve.GOST 7360-2015.Thread: 6-5/8 "Reg Box x 6-5/8" Reg Box.API RP Standard 7G Grade G-105 Grade MInternal flow diameter with seat for check valve (safe valve).Outside diameter: 8. "Length: 1000 mm.Bore: 70mm |
| 11 | Sub 6-1/2 "Reg Box x 8-3/4" RegQuantity: 2 piecesAbove the bit sub for 6-1/2 "UTB to 8-3/4" bits with operating pressure of 10000 PSI, bored for reversevalve. GOST 7360-2015.Thread: 4-1/2 "Reg Box x 4-1/2" IF Box.API RP Standard 7G Grade G-105 Grade MOutside diameter: 8. "Length: 1000 mm.Bore: 70 mm. |
| 12 | Sub 6-5/8 "Reg Box x 5-1/2" RegQuantity: 3 piecesSafety adapter (to square) upper (left thread) 6-5/8 "Reg Box x 5-1/2" FH Pin (right thread).Safety sub with operating pressure 10000 PSI (per square) upper. GOST 7360-2015Thread: (left thread) 6-5/8 "Reg Box x 5-1/2" FH Pin (right thread).API RP Standard 7G Grade G-105 Grade MOutside diameter: 7-3/4. "Length: 600 mm.Bore: 70 mm. |
| 13 | X-OVER 2 7/8INCH EUE PIN X 2INCH NPT PIN 1FT LONG |
| 14 | X-OVER 3 1/2INCH EUE PIN X 3INCH NPT PIN 1FT LONG |
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.