The Inside BOP Valve is a specialized high-pressure check valve designed for rapid deployment in drilling operations. It serves as a crucial safety component to protect personnel and equipment.
Its primary function is to be quickly installed onto the drill string when well control signals are detected, providing an immediate barrier against high-pressure blowouts. The valve's intelligent tapered plug design is engineered to reduce erosion from abrasive drilling mud, guaranteeing a positive seal and reliability when it matters most.
Furthermore, it acts as a protective barrier for surface equipment upstream of the pump. A dedicated, pre-installed release tool simplifies handling, keeps the valve in the normally open position during regular operations, and enables fast, secure mounting under pressure.
Technical Specification
| OD (mm/in) | ID (mm/in) | Connection |
|---|---|---|
| 95 (3-3/4) | 35 (1-3/8) | NC26 |
| 111 (4-3/8) | 35 (1-3/8) | NC31 |
| 120.7 (4-3/4) | 45 (1-25/32) | NC38 |
| 159 (6-1/4) | 57.2 (2-1/4) | NC50 |
| 165 (6-1/2) | 57.2 (2-1/4) | NC50 |
| 178 (7) | 57.2 (2-1/4) | HT55 |
| No. | Description |
|---|---|
| 1 | CASING SCAPPER FOR Casing 4-1/2” J25 |
| 2 | FOSV 4-1/2” IF PIN X 4-1/2”IF BOX. 10K |
| 3 | FOSV REPAIR KIT |
| 4 | Lifting sub with 6 5/8 Reg PIN, L=1,2 m, 18°, 127mm (5”) for elevator |
| 5 | Lifting sub with 4 1/2" IF PIN, L=1,2 m, 18°, 127mm (5”) for elevator |
| 6 | FLANGE |
| 7 | PUP JOINT |
| 8 | SAFETY VALVE |
| 9 | CROSS OVER |
| 10 | CROSS OVER |
| 11 | CROSS OVER |
| 12 | CROSS OVER |
| 13 | LIFTING SUB |
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.