Inside BOP Valve (Arrow Type): Internal Blowout Preventer
The Arrow-Type Inside BOP Valve is a high-performance check valve specifically designed to act as an internal barrier against blowouts by sealing the drill string's internal passage during a well control event.
Function & Mechanism:
This valve features a robust arrow-type sealing design. Under normal drilling conditions, it permits the standard flow of drilling fluids. However, upon detection of a reverse flow or a well kick (signified by reverse circulation pressure inside the drill tools), the valve's arrow head is designed to shut down instantaneously. This rapid closure, driven by the reverse pressure and assisted by a spring force, effectively cuts off the inner channel of the drilling tools, preventing high-pressure oil and gas from surging to the surface.
Operational Use:
The valve is held in a standby position on the platform, ready for deployment. For use, it is installed between the drill pipe and the drill bit. A key feature is its dedicated release tool, which is pre-installed in the valve. This tool maintains the valve in a normally open position, allowing for reverse circulation when needed for operational purposes. The entire assembly is prepared in advance, enabling rig crews to quickly install it onto the drill string immediately when warning signs appear, such as during tripping operations.
Applications:
It is an indispensable safety device used in drilling operations to complement surface BOP systems, providing an internal layer of protection to mitigate the risks of blowouts.
Technical Specifications:
| Outside Diameter (mm/in) | Inside Diameter (mm/in) | Connection Type |
|---|---|---|
| 104.8 (4-1/8) | 41.3 (1-5/8) | NC31 |
| 120.7 (4-3/4) | 54.0 (2-1/8) | NC38 |
| 127.0 (5) | 54.0 (2-1/8) | NC38 |
| 165.0 (6-1/2) | 70.0 (2-3/4) | NC50 |
| 168.0 (6-5/8) | 70.0 (2-3/4) | NC50 |
| 178.0 (7) | 70.0 (2-3/4) | 5-1/2 FH |
| 203.0 (8) | 71.4 (2-13/16) | 6-5/8 REG |
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.