The Hydro Cleaner Torque Reduction Sub is an essential downhole tool designed to mitigate the excessive torque generated during drilling operations in challenging short-radius horizontal and high-angle well sections.
It is typically connected within the Bottom Hole Assembly (BHA), with a recommended placement every 60 feet. The tool's effectiveness stems from its ingenious mechanical design, featuring a slip spiral inner sleeve, a straight rib outer sleeve, and a body mandrel. These components work together while remaining in a relative non-rotating state, effectively absorbing and reducing frictional forces between the drill string and the wellbore.
The primary result is a dramatic reduction in surface torque by 25% to 35%. This reduction leads to multiple key benefits: decreased wear on drill string components, improved weight-on-bit transfer for more efficient drilling, enhanced ability to drill longer lateral sections, and a significant reduction in the risk of getting stuck or experiencing torque-related failures.
Technical Specifications:
| Working OD (mm/in) | Blade OD (mm/in) | Tool OD (mm/in) | ID (mm/in) | OAL (mm/ft) | Connection |
|---|---|---|---|---|---|
| 184.2 (7-1/4) | 174.6 (6-7/8) | 165.1 (6-1/2) | 92 (3-5/8) | 1064 (3.5) | XT50 B×P |
| 193.7 (7-5/8) | 184.2 (7-1/4) | 177.8 (7) | 108 (4-1/4) | 1064 (3.5) | XT57 B×P |
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.