Incremental circulating valve

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The Incremental Circulating Valve is a critical safety tool designed to provide a reliable emergency circulation path during well control events. Its primary function is to serve as a failsafe: if the drill bit becomes plugged while killing a well, this valve can be activated to instantly establish a new circulation route, allowing the well killing operation to continue without interruption. Installed near the bit before entering hydrocarbon zones, it acts as an insurance policy against total loss of circulation. This capability is vital for regaining control of a well, preventing dangerous pressure build-up, and avoiding costly and risky fishing operations or sidetracks. By ensuring you always have a way to pump, the Incremental Circulating Valve enhances safety protocols, protects your crew and assets, and provides peace of mind when drilling into potential pay zones.
Conatct For Details
DetailReview(0)Additional

Product Introduction

The Incremental Circulating Valve is a specialized bypass valve integral to well control contingency planning. It is run in the Bottom Hole Assembly (BHA) close to the drill bit prior to drilling into potential oil and gas zones.

Its sole purpose is to act as an emergency circulatory bypass. During a well kill operation, if the drill bit nozzles become obstructed by debris (a common occurrence in kick situations), circulating fluid down the drill string becomes impossible, halting the critical well control process. In this emergency scenario, the Incremental Circulating Valve is activated (typically by a combination of pressure cycles and ball drops), which opens its ports. This action creates a new, unimpeded circulation path above the blocked bit, allowing drilling personnel to continue pumping kill fluid to regain control of the wellbore pressure and safely circulate the influx out.

Technical Specifications:

OD (mm/in)ID (mm/in)Ball Diameter (mm/in)Connection
105 (4-1/8)38 (1-1/2)38 (1-1/2)NC31 B×P
121 (4-3/4)50.8 (2)48 (1-7/8)NC38 B×P
160 (6-5/16)50.8 (2)65 (2-9/16)NC46 B×P
178 (7)57.2 (2-1/4)65 (2-9/16)5-1/2 FH B×P
203 (8)57.2 (2-1/4)70 (2-3/4)6-5/8 REG B×P


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit