Roller Reamer: The Durable Solution for Wellbore Gauge Control
The Roller Reamer is an indispensable drilling tool designed specifically for reaming operations to ensure a consistently full-gauge wellbore. It is deployed to combat the natural wear of drill bits in hard and abrasive formations, which can cause the hole to become under-gauge. By actively reaming the wellbore to its specified diameter, this tool mitigates a host of downstream problems, including difficulty running casing, poor logging tool responses, and inadequate cement jobs.
The tool's effectiveness stems from its hardened, rotating rollers. As the drill string rotates, these rollers turn freely, mechanically cutting and compacting the formation to enlarge and smooth the wellbore wall. This rolling action is fundamentally more efficient than sliding, resulting in significantly lower frictional resistance and torque demands on the drill string. The robust construction of the rollers and bearings provides exceptional resistance to abrasion, ensuring long service life and reliability throughout the drilling process.
Whether ensuring a new section is drilled to size or correcting an under-gauge section below a worn bit, the Roller Reamer provides critical insurance for wellbore quality and operational continuity.
Technical Specification Overview:
| Working OD (mm/in) | ID (mm/in) | Body OD (mm/in) | OAL (mm/ft) | Roller Length (mm/in) | Connection |
|---|---|---|---|---|---|
| 149.2 (5-7/8) | 31.8 (1-1/4) | 120.7 (4-3/4) | 1400 (4.6) | 46 (1-13/16) | NC38 |
| 215.9 (8-1/2) | 44.5 (1-3/4) | 165 (6-1/2) | 1730 (5.7) | 71.4 (2-13/16) | NC50 |
| 311.15 (12-1/4) | 71.4 (2-13/16) | 203 (8) | 1900 (6.2) | 100 (3-15/16) | 6-5/8 REG |
| 444.5 (17-1/2) | 76.2 (3) | 229 (9) | 2200 (7.2) | 140 (5-1/2) | 7-5/8 REG |
| 711.2 (28) | 76.2 (3) | 241.3 (9-1/2) | 2867 (9.4) | 178 (7) | 7-5/8 REG |
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.