HYRIG can supply the API 602 forged steel check valve range. The API 602 forged steel check valve is a small-bore, high-pressure non-return valve with a forged body. It is available with piston or swing disc designs for instrument lines, pump discharge, and steam drains.
| NPS | DN | Piston L (mm) | Piston d (mm) | Piston H (mm) | Piston Wt (kg) | Swing L (mm) | Swing d (mm) | Swing H (mm) | Swing Wt (kg) |
|---|---|---|---|---|---|---|---|---|---|
| 1/2 | 15 | 79 | 10 | 54.5 | 1.4 | 79 | 13 | 54.5 | 1.3 |
| 3/4 | 20 | 92 | 13 | 54.5 | 1.9 | 92 | 13 | 54.5 | 1.7 |
| 1 | 25 | 111 | 17.5 | 72 | 2.6 | 111 | 18 | 72 | 2.4 |
| 1 1/2 | 40 | 152 | 28.5 | 94 | 5.3 | 120 | 29 | 94 | 5.1 |
| 2 | 50 | 172 | 35 | 112 | 9.0 | 140 | 36.8 | 112 | 8.8 |
Data source: Technical data table. Full Class 150-1500 matrix available on request.
| Dimension | Standard |
|---|---|
| Socket weld end | ASME B16.11 |
| Threaded end | ASME B1.20.1 |
| Pressure-temperature rating | ASME B16.34 |
| Face-to-face | Manufacturer standard (API 602) |
The forged body provides a dense grain structure compared with cast construction, reducing porosity and improving pressure integrity in small-bore, high-pressure service.
The piston (lift) disc is guided within the body bore and can be spring-assisted for fast, chatter-free closure. It is suited to pulsating flow and high-pressure lines where backflow must be stopped quickly.
The swing disc moves clear of the flow path, producing low pressure drop in horizontal lines. It is suited to steady flow where rapid closure is not critical.
Replacing a forged check valve? Verify these points:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Q: What is the difference between piston and swing disc in an API 602 valve?
A piston disc closes faster with spring assist and is suited to pulsating flow. A swing disc has lower pressure drop and is suited to steady horizontal flow.
Q: What end connections are available?
Socket weld per ASME B16.11 and threaded per ASME B1.20.1.
Q: What is the typical lead time?
Standard lead time is 4-6 weeks depending on material and end connection.
Q: Are material certificates available?
Yes. EN 10204 3.1 material certificates can be provided on request.
To select the correct API 602 check valve, provide the line size, pressure class, flow behaviour (steady or pulsating), and end connection type. Our engineers will confirm the disc design and body material.
For API 602 forged steel check valve selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.