API Globe Valve FAQ | Installation, Throttling & Maintenance

2026-11-16 20:53

API Globe Valve FAQ

HYRIG can supply API globe valves. This FAQ addresses common engineering and procurement questions regarding installation, maintenance, throttling, and standard boundaries.

Frequently Asked Questions

Q: Can a globe valve be installed in any orientation?

Globe valves should be installed with the stem vertical (upright) or horizontally. Installing the valve with the stem pointing downward is not recommended, as debris can accumulate in the bonnet cavity.

Q: What is the difference between a globe valve and a gate valve?

A globe valve uses a plug-type disc for throttling and frequent operation. A gate valve uses a wedge-shaped disc for on/off isolation with minimal pressure drop.

Q: What is the purpose of the OS&Y design?

An OS&Y (outside screw and yoke) design keeps the stem threads outside the process fluid, preventing corrosion and providing a clear visual indication of valve position.

Q: Can the stem packing be replaced under pressure?

Yes, when the valve is fully open, the backseat engages the bonnet, isolating the packing area. The packing can be replaced while the line remains pressurized, provided the backseat is in good condition.

Q: What is the typical lead time for an API globe valve?

Standard lead time is 4 to 6 weeks depending on the valve size, pressure class, material, and actuation requirements.

Q: Are EN 10204 3.1 material certificates provided?

Yes. Material certificates for the body, bonnet, and trim components can be provided upon request.

Q: What is the difference between a bolted and pressure-seal bonnet?

Bolted bonnets are used for Class 150-900 and are easy to maintain. Pressure-seal bonnets are standard for Class 1500-2500 and rely on line pressure to assist the seal.

Q: Can I use a globe valve for high-temperature steam?

Yes. Globe valves are commonly used for steam service. The OS&Y design protects the stem threads from the high temperature, and the flexible wedge design is not used here, but the plug disc handles thermal expansion well.

Selection Support

For specific questions regarding your globe valve installation or maintenance, provide the valve size, pressure class, and operating conditions. Our engineering team will confirm the specification.

Contact

For more information on API globe valves, contact HYRIG: info@hyrig.com

Related Pages

Name:
Message:
Verification code:
Submit
Comment