HYRIG can supply the API globe valve range. The API globe valve is a rising-stem isolation and throttling valve with a plug-type disc. It features an OS&Y design, bolted bonnet for Class 150-900, and pressure-seal bonnet for Class 1500-2500.
| NPS | DN | L RF (mm) | L RTJ (mm) | L BW (mm) | d (mm) | H (mm) | W (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| 1/2 | 15 | 108 | 119 | 108 | 13 | 185 | 100 | 4 |
| 1 | 25 | 127 | 140 | 127 | 25 | 211 | 100 | 5.5 |
| 2 | 50 | 203 | 216 | 203 | 51 | 328 | 200 | 18 |
| 3 | 80 | 241 | 254 | 241 | 76 | 373 | 280 | 43 |
| 4 | 100 | 292 | 305 | 292 | 102 | 400 | 300 | 54 |
| 6 | 150 | 406 | 419 | 406 | 152 | 528 | 350 | 95 |
| 8 | 200 | 495 | 508 | 495 | 203 | 680 | 400 | 160 |
| 12 | 300 | 698 | 711 | 698 | 305 | 880 | 500 | 373 |
| Dimension | Standard |
|---|---|
| Face-to-face (RF) | ASME B16.10 |
| Face-to-face (RTJ) | ASME B16.10 |
| Face-to-face (BW) | ASME B16.10 |
| Flanged ends | ASME B16.5 / B16.47 |
| Butt weld ends | ASME B16.25 |
| Pressure-temperature rating | ASME B16.34 |
The valve uses a plug-type disc that moves linearly along the stem. As the valve opens, the disc lifts off the seat, gradually increasing the flow area. This design provides precise throttling control, making it suitable for frequent operation and flow regulation.
The OS&Y (outside screw and yoke) design places the stem threads outside the valve body, exposed to the atmosphere. This prevents the threads from contacting the process fluid, reducing corrosion and galling. The rising stem provides a clear visual indication of the valve position, as the stem height directly corresponds to the open/closed status.
Class 150-900 valves use a bolted bonnet with studs and nuts. Class 1500-2500 valves use a pressure-seal bonnet, where line pressure assists the seal and the bolting no longer scales with pressure class.
Replacing an API globe valve requires verification of four factors:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation. For throttling service, verify cavitation and flashing risks with the manufacturer.
Q: What is the main difference between a globe valve and a gate valve?
A globe valve is designed for throttling and frequent operation, while a gate valve is for on/off isolation with minimal pressure drop.
Q: What is the purpose of an OS&Y design?
An OS&Y (outside screw and yoke) design keeps the stem threads outside the process fluid, preventing corrosion and providing clear visual indication of valve position.
Q: When should I use a pressure seal bonnet?
Pressure seal bonnets are standard for Class 1500 and 2500 globe valves. For Class 150-900, bolted bonnets are sufficient and easier to maintain.
Q: What is the typical lead time?
Standard lead time is 4 to 6 weeks depending on size, class, material, and actuation requirements.
To confirm the correct globe valve configuration for your line, provide the line size, pressure class, operating temperature, and throttling requirements. Our engineering team will verify the disc type and bonnet design.
For API globe valve selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.