OS&Y Globe Valve | Outside Screw and Yoke Design

2026-11-16 20:51

OS&Y Globe Valve | Outside Screw and Yoke Design

HYRIG can supply API globe valves with an OS&Y (Outside Screw and Yoke) design. This configuration places the stem threads outside the valve body, protecting them from the process fluid and providing clear visual indication of the valve position.

Key Facts

  • OS&Y Design: Outside Screw and Yoke. The stem threads are exposed to the atmosphere, not the fluid.
  • Stem Type: Rising stem. The stem moves upward as the valve opens.
  • Corrosion Protection: Threads are isolated from corrosive or dirty media.
  • Visual Indication: Stem height directly shows the valve position (open, closed, or throttled).

Key Specifications

FeatureOS&Y DesignNon-Rising Stem (NRS) Design
Thread LocationOutside the bodyInside the body
Fluid ContactNo fluid contact with threadsThreads exposed to fluid
Position IndicationVisual (stem height)Requires indicator
MaintenanceEasy lubrication and inspectionHarder to access threads
Typical ApplicationSteam, corrosive mediaBuried valves, limited space

Dimensions

DimensionStandard
Face-to-faceASME B16.10
Flanged endsASME B16.5 / B16.47
Butt weld endsASME B16.25
Stem ThreadOutside the bonnet

Structure and Working Principle

In an OS&Y valve, the stem threads are located above the bonnet, outside the pressure boundary. The yoke holds the stem nut, which is turned by the handwheel. As the stem rotates, the threads engage the stem nut, causing the stem to rise or lower.

Because the threads are outside the body, they are not exposed to the process fluid. This prevents corrosion, galling, and the accumulation of debris in the threads, which is a common failure mode in non-rising stem (NRS) valves. Additionally, the exposed stem provides a clear visual reference: if the stem is up, the valve is open; if it is down, the valve is closed.

Cross-Reference and Replacement

When replacing an OS&Y globe valve:

  1. Verify Installation Space: The rising stem requires vertical clearance above the valve. Ensure there are no obstructions.
  2. Check the Stem Material: For corrosive environments, verify the stem material (e.g., stainless steel) to prevent atmospheric corrosion.
  3. Confirm the Bonnet Type: OS&Y valves can have either bolted or pressure-seal bonnets; ensure the replacement matches the existing configuration.

Applications

  • Steam Systems: The OS&Y design prevents the stem threads from being exposed to high-temperature steam, avoiding corrosion and seizure.
  • Corrosive Media: Ideal for chemical processes where fluid contact with the threads would cause rapid degradation.
  • Operator Safety: Visual indication allows operators to immediately confirm the valve position without relying on instrumentation.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Frequently Asked Questions

Q: What is the main advantage of an OS&Y valve?

The main advantage is that the stem threads are outside the fluid. This prevents corrosion and galling, making the valve easier to maintain and extending its service life.

Q: What is the difference between OS&Y and non-rising stem?

An OS&Y valve has a rising stem and external threads. A non-rising stem valve has internal threads and the stem does not move vertically.

Q: Can an OS&Y valve be installed in a horizontal pipe?

Yes, but the stem should be vertical (upright) or horizontal. Installing the valve with the stem pointing downward is not recommended.

Q: What is the typical lead time?

Standard lead time is 4 to 6 weeks depending on size, class, and material.

Selection Support

To confirm the correct OS&Y configuration for your line, provide the operating pressure, temperature, and available installation space. Our engineers will verify the stem design and bonnet connection.

Contact

For OS&Y globe valve selection, contact HYRIG: info@hyrig.com

Related Pages

Name:
Message:
Verification code:
Submit
Comment