API 610 Pumps for SRU + Water Injection – Complete Selection & Integration Guide

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Water injection maintains oil reservoir pressure using low‑sulfate water from a Sulfate Removal Unit (SRU). Selecting the right API 610 pump ensures seamless SRU‑to‑injection pressure matching: BB3 for medium‑high pressure (30‑350 bar), BB5 for ultra‑high pressure (up to 700 bar), VS1 for compact offshore platforms, and BB2 for low‑medium pressure (15‑30 bar). This guide covers flow/head ranges, material selection (super duplex, Hastelloy), and system integration. Contact info@hyrig.com

Conatct For Details
DetailReview(0)Additional

Water injection (waterflood) is a critical enhanced oil recovery (EOR) technique – low‑sulfate seawater, treated by a Sulfate Removal Unit (SRU), is injected into reservoirs to maintain pressure and improve oil recovery. The integrated SRU + water injection system demands:

  • Ultra‑high pressure delivery – matching reservoir pressure (from 30 bar to over 350 bar)

  • Abrasion & corrosion resistance – trace formation sand and residual sulfate crystals

  • Seamless SRU‑to‑injection pressure matching – avoid intermediate pressure drops that cause scaling

  • Space adaptability – offshore FPSO decks vs. land‑based central injection stations

API 610 provides four primary pump types for this duty. Below is a structured guide covering BB3 (main workhorse), BB5 (extreme high pressure), VS1 (compact offshore), and BB2 (low‑medium pressure).


1. BB3 (Between Bearing Type 3) – Axially Split Multistage – Primary Injection Pump

Structural Definition (API 610)
Horizontal, axially split casing, multiple impellers in opposed arrangement. Bearings at both ends. High rigidity, design pressure covers medium to ultra‑high ranges.

Water Injection Adaptability – SRU Integration Core

  • Key Advantage: Multistage pressurisation precisely matches reservoir injection pressure (30–350 bar). Seamlessly connects to SRU discharge pressure (30–60 bar) without extra boosters. Opposed impellers balance axial thrust – vibration ≤2.5 mm/s prevents pipeline shock. Wetted parts in super duplex 2507 or Hastelloy resist corrosion from injected water and abrasion from trace sand.

  • Scenario: FPSO reservoir injection, land‑based central injection stations, deep low‑permeability reservoirs (high pressure required).

  • Representative Models: Sulzer MSD‑XP series (extreme pressure), PumpWorks BB3‑XT series.

  • Key Parameters: Flow 50–3200 m³/h, Head 200–5000 m, Design pressure ≤425 bar, Temperature ≤60°C (injection water).


2. BB5 (Between Bearing Type 5) – Radially Split Barrel Multistage – Ultra‑High Pressure

Structural Definition (API 610)
Horizontal barrel casing, radially split internal cartridge. Multistage impellers in series. Bearings at both ends. Designed for severe high‑temperature, high‑pressure service with excellent shock absorption.

Water Injection Adaptability

  • Key Advantage: Barrel construction handles extreme pressures (design up to 700 bar) – ideal for ultra‑deep reservoirs (>200 bar). Smooth flow passages reduce residual sulfate crystal deposition. Maintenance interval ≥12,000 hours. Radially split design allows quick cleaning of sand or scale deposits.

  • Scenario: Land‑based ultra‑deep reservoir injection, fractured reservoir high‑pressure injection, injection water containing trace formation sand.

  • Representative Models: Sulzer CP‑HP series, Cameron BB5 ultra‑high pressure injection pump.

  • Key Parameters: Flow 50–1000 m³/h, Head 500–8000 m, Design pressure ≤700 bar, Temperature ≤120°C.


3. VS1 (Vertically Suspended Type 1) – Vertical Turbine – Compact Offshore

Structural Definition (API 610)
Vertically suspended, multistage diffuser bowl. Impeller/bowl assembly submerged in a buffer tank, connected to above‑grade motor via long shaft. Vertical footprint saves deck space.

Water Injection Adaptability

  • Key Advantage: Vertical footprint is only 1/3 of a horizontal pump – ideal for FPSO decks and platforms. Direct compatibility with SRU vertical pumps (also VS1) – reduces piping complexity. Multistage diffuser design delivers stable head (200–1500 m), meeting offshore medium‑high pressure injection needs (30–150 bar).

  • Scenario: Floating platform injection, drilling rig emergency injection, small offshore waterflood modules.

  • Key Parameters: Flow 50–3500 m³/h, Head 200–1500 m, Design pressure ≤200 bar, Wetted parts in duplex stainless steel.


4. BB2 (Between Bearing Type 2) – Radially Split Single‑Stage or Two‑Stage – Low‑Medium Pressure

Structural Definition (API 610)
Horizontal, radially split volute, single‑stage double‑suction or two‑stage. Impeller(s) between two bearing sets. Centreline support.

Water Injection Adaptability

  • Key Advantage: Double‑suction impeller covers wide flow range (100–5000 m³/h) – ideal for land‑based low‑medium pressure injection (15–30 bar). Directly connects to SRU medium‑pressure discharge (15–30 bar). Low NPSH prevents cavitation bubbles that could affect reservoir performance. Radially split casing allows quick scale cleaning (40% efficiency gain).

  • Scenario: Land‑based low‑medium pressure injection stations, shallow reservoir waterflood, injection system booster duty.

  • Key Parameters: Flow 100–5000 m³/h, Head 100–450 m, Design pressure ≤50 bar, Temperature ≤45°C, Wetted parts in duplex stainless steel.


SRU + Water Injection – Integrated Selection Decision Matrix

API 610 TypeCore ScenarioFlow RangeHead RangePressure RangeMaterialKey Advantage (Integration)
BB3Offshore/onshore medium‑high pressure injection, deep reservoir50–3200 m³/h200–5000 m30–350 barSuper duplex / HastelloySeamless from SRU high‑pressure outlet (30–60 bar)
BB5Onshore ultra‑high pressure, ultra‑deep reservoir50–1000 m³/h500–8000 m>200 bar (up to 700 bar)Hastelloy C276Extreme pressure, shock resistant, anti‑scaling
VS1Offshore compact injection, floating platforms50–3500 m³/h200–1500 m30–150 barDuplex SSSmall footprint, compatible with SRU VS1 vertical pumps
BB2Onshore low‑medium pressure, shallow reservoir100–5000 m³/h100–450 m15–30 barDuplex SSHigh flow, low NPSH, connects to SRU medium‑pressure outlet

SRU → Water Injection – Seamless Integration Principles (Closed Loop Logic)

To ensure a reliable, scaling‑free waterflood system from seawater intake to reservoir injection, follow these principles:

  • Pressure matching without gaps:

    • SRU NF membrane discharge 15–30 bar → low‑medium pressure injection → select BB2 (no booster needed).

    • SRU discharge 30–60 bar → medium‑high pressure injection → select BB3 (direct step‑up to reservoir pressure).

    • Ultra‑high pressure injection (>200 bar) → select BB5 (SRU outlet → BB5 multistage boost). Avoid intermediate pressure drops that trigger sulfate crystallisation.

  • Structural compatibility:

    • Offshore: If SRU uses VS1/VS6 vertical pumps, continue with VS1 for injection – saves deck space and reduces piping.

    • Land‑based high flow: If SRU uses BB2/BB3 horizontal pumps, continue with BB series (BB2/BB3/BB5) for uniform maintenance.

  • Anti‑scaling & abrasive resistance:

    • Specify polished wetted parts (Ra ≤0.8 μm) to reduce sulfate crystal adhesion.

    • For injection water containing trace formation sand, select wear‑resistant materials (Hastelloy C276, ceramic‑coated impellers).

  • Compliance & system compatibility:

    • All pumps meet API 610 12th Edition, ISO 13709.

    • Materials compatible with SRU chemicals (anti‑scalants, biocides) and oilfield injection standards (e.g., NACE MR0175 for H₂S service).

    • High‑pressure seals per API 682 (leakage ≤10 ml/h).


Typical Integrated Flow Process Examples

Offshore FPSO:
Seawater Lift (VS6) → SRU Pretreatment (VS1) → SRU High‑Pressure Feed (BB2) → Water Injection (VS1 / BB3) → Reservoir

Land‑Based Large Oilfield (Ultra‑Deep):
Seawater Lift (BB1) → SRU Pretreatment (BB2) → SRU High‑Pressure Feed (BB3) → Water Injection (BB5) → Ultra‑Deep Reservoir

Land‑Based Medium‑Pressure Field:
Seawater Lift (OH2) → SRU Pretreatment (VS6) → SRU Medium‑Pressure Feed (BB2) → Water Injection (BB2) → Shallow Reservoir

For engineering assistance, detailed pump sizing, or a quotation for any API 610 SRU + water injection pump (BB3, BB5, VS1, BB2), please contact info@hyrig.com. We respond within 24 hours.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit