The API 610 VS6 vertical suspended barrel pump is the preferred type for handling saturated condensate – tower overhead liquids, hydrocarbon condensate, process saturated condensate, steam condensate, and any fluid that is at or near its boiling point and prone to flashing with even a small pressure drop. Such fluids are extremely challenging for horizontal pumps (OH2 or BB2) because available NPSH is often insufficient. The VS6 configuration is specifically designed to overcome these problems.
Why Condensate Requires VS6
Saturated condition – the fluid is at its vapor pressure; any suction pressure drop causes immediate flashing and cavitation.
Low NPSHa – condensate is often drawn from a condensate drum or reflux drum at low liquid level, leaving very little net positive suction head.
Clean fluid – condensate is generally free of solids and low in corrosivity, so material requirements are modest, but hydraulic reliability is critical.
Why VS6 is the Solution
Ultra‑low NPSHr – the immersed suction (pump bowl submerged in liquid) together with barrel pressurisation provides the lowest possible NPSH requirement, eliminating flashing, cavitation, and vapor lock.
Double casing barrel – the outer shell maintains backpressure on the liquid, suppressing vapour formation inside the pump.
Multistage hydraulics – condensate often needs to be pumped back to a tower (reflux) or to downstream units at medium to high head. Multistage impellers deliver this without cavitation.
Superior seal environment – vertical design keeps the mechanical seal at the top, away from the hot, flashing liquid. The seal runs in a clean barrier fluid, not in two‑phase flow – greatly extending seal life.
Applicable Media
Tower overhead condensate (refinery, petrochemical)
Hydrocarbon condensate (light ends)
Process saturated condensate
Steam condensate (from steam systems)
Any liquid near its boiling point with low NPSHa
Operating Envelope
Temperature: Ambient to 180°C (steam condensate applications)
Pressure: Medium – Class 150 to 600 (depending on system)
Fluid: Clean, low viscosity, saturated, no solids
Applications: Condensate reflux, condensate transfer, steam condensate recovery
Key Design Features
Double casing barrel – pressure‑containing outer shell, internal cartridge.
Multistage diffuser – high head with low NPSHr.
API 682 dual mechanical seals – Plan 53A (pressurised reservoir) or Plan 54 (circulated barrier fluid). Seal never contacts the saturated fluid.
Materials: Stainless steel wetted parts (304 or 316L) – resists carbonic acid corrosion in steam condensate and light hydrocarbon attack.
Vertical dry pit installation – no footprint on ground level; pull‑out cartridge for easy maintenance without breaking piping.
Final Four Refinery Pump Types – Complete Recap
| Pump Type | Service | Media Examples |
|---|---|---|
| OH2 (overhung) | Ambient to medium temp, clean light/medium oils | Diesel, kerosene, gasoline, naphtha, aromatics, solvent oils, ambient crude |
| BB2 (between bearing) | High temperature heavy oils | Residue, VGO, slurry, hydrocracker feed, high temperature tower bottoms (220‑420°C) |
| BB3 (barrel multistage) | Ultra‑high pressure clean fluids | High pressure boiler feedwater, high pressure water injection |
| VS6 (vertical barrel) | Saturated condensate, LPG, LNG, condensate, flashing light ends | Tower overhead condensate, hydrocarbon condensate, steam condensate, propane, butane, LNG |
One Sentence Summary
Saturated condensate, near‑boiling point, low NPSHa, prone to flashing → the correct choice is API 610 VS6 vertical suspended barrel pump.
For complete technical datasheets, sizing assistance, or a quotation for any API 610 VS6 condensate pump, please contact info@hyrig.com. We respond within 24 hours.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.