The API 610 VS6 vertical suspended barrel pump is the dedicated standard for LNG (liquefied natural gas, –162°C), cryogenic light hydrocarbons, and super‑saturated, highly volatile fluids that flash instantly under standard pumping conditions. Designed for dry pit installation, double casing, multistage, with a removable cartridge and between‑bearing rotor support, the VS6 configuration is the only reliable solution for extremely low NPSHa, cryogenic temperatures, flammability, and zero leakage requirements.
Why LNG Requires VS6 (Distinct from LPG / Standard Light Ends)
Ultra‑low NPSH – eliminates LNG cavitation
Optional first‑stage double‑suction impeller plus inducer, combined with a barrel‑type submerged inlet, gives NPSHr as low as 0.5–1.5 m. This perfectly matches LNG tankage (low liquid level, direct tank‑top suction) and eliminates flashing, vapor lock, and cavitation damage.
Double casing cryogenic construction
Inner casing contains pressure; outer casing provides insulation/cold retention. Withstands cryogenic thermal contraction and pressure surges. Multistage impellers deliver high head for loading, export, and booster service. Vertical dry pit installation with pull‑out cartridge allows maintenance without breaking pipework or decommissioning the tank.
Cryogenic seal safety (zero leakage)
LNG is extremely flammable and prone to leakage at low temperatures. The top‑mounted mechanical seal is located away from the cryogenic liquid (vapour phase environment), preventing dry running and seal damage. Standard: API 682 dual mechanical seals with Plan 53A/54 using cryogenic barrier fluid or nitrogen purge. Explosion‑proof Ex d IIB T6, anti‑static, copper‑free/aluminium‑free.
Cryogenic‑compatible materials
Wetted parts and barrel: 9% nickel steel, 304/316L stainless steel, or approved cryogenic alloys – resistant to brittle fracture at –162°C. Shaft and bearings: cryogenic alloy steel and graphite/carbon composite sleeve bearings, self‑lubricating at low temperature, no oil‑related failure risk.
Applicable Media & Operating Envelope
Media: LNG (mainly methane), liquefied ethylene, ethane, propane, cryogenic LPG, saturated light ends; LNG tank farm, loading, export, booster service.
Temperature: –170°C to +60°C (covers LNG –162°C).
Pressure: Medium to high – Class 600/900, up to 150 bar.
Core challenge: Extremely high vapour pressure, NPSHa often <1 m, flash cavitation, cryogenic contraction, flammability, zero leakage requirement.
Key Design Features (LNG‑Specific, differing from LPG VS6)
| Feature | LNG VS6 | LPG VS6 (reference) |
|---|---|---|
| Operating temperature | –170°C to +60°C | –45°C to +60°C |
| Primary materials | 9% nickel steel, cryogenic stainless steel | 304/316L stainless steel |
| NPSHr target | ≤1.0–1.5 m (stricter) | ≤1.5–2.0 m |
| Sealing plan | Dual seals + Plan 53A/54 (cryogenic barrier fluid / N₂) | Dual seals + Plan 53A/54 |
| Cold retention | Mandatory cold insulation, anti‑cold bridge | Standard insulation |
| Bearings | Graphite/carbon sleeve (dry run tolerant) | Rolling bearings with forced lube |
Configuration Summary (LNG VS6)
Construction: Double casing barrel, multistage, first‑stage double‑suction or inducer, pull‑out cartridge, dry pit, between‑bearing rotor support.
Seals: API 682 dual mechanical seals + Plan 53A/54 (cryogenic ethylene glycol / nitrogen barrier), seal chamber cold retention, leak detection.
Materials: Barrel/inner casing – 9% nickel steel; impeller/diffuser – 316L or cryogenic stainless steel; shaft – 9% nickel or duplex; bearings – graphite/carbon composite; copper‑free, zinc‑free.
Auxiliary: Cryogenic bearing lubrication (if required), cold insulation, cold alignment, vacuum or nitrogen cold retention, vibration/temperature monitoring.
Performance: Flow up to 1000 m³/h, head up to 1500 m, speed 3000/3600 rpm, design pressure ≤150 bar.
Typical Applications
LNG receiving terminal: tank export pumps, loading pumps, booster pumps, reflux pumps.
LNG liquefaction plant: cryogenic light ends transfer, LNG product send‑out.
Offshore LNG platform and marine LNG fuel systems.
One Sentence Summary
LNG – cryogenic, extremely low NPSHa, instant flashing, zero leakage requirement → the only standard selection is API 610 VS6 cryogenic double‑casing barrel pump.
For complete technical datasheets, sizing assistance, or a quotation for any API 610 VS6 LNG pump (cryogenic, –162°C), please contact info@hyrig.com. We respond within 24 hours.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.