BB1 Pump – API 610 Horizontal Axial Split Between Bearings Centrifugal Pump

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
BB1 pump – API 610 horizontal axial split casing, between bearings, single stage double suction. Performance: flow up to 2500 m³/h, head up to 250 m, temperature up to 400°C, pressure up to 30 bar. Centerline support ensures thermal stability. Double suction impeller balances axial force, reduces NPSHr. Axial split casing allows full rotor access without disconnecting piping. Low vibration, long service life. API 682 mechanical seal compatible. Materials: carbon steel, 304/316L, duplex. Applications: refinery process, petrochemical circulation, power plant cooling water, industrial water supply, chemical medium transfer. Free datasheet, drawing, factory quotation.

Conatct For Details
DetailReview(0)Additional

The BB1 pump is an API 610 (latest edition) horizontal, axial split casing, between-bearings centrifugal pump, typically configured as single stage with double suction impeller. It is the industry standard for medium flow, medium head, high temperature continuous service in refineries, petrochemical plants, power stations, and heavy industrial processes.

Key Design Features

  • API 610 BB1 Type – Axially split casing (horizontal split along the centerline). Removing the upper half provides full access to the rotor, bearings, and internal seals without disturbing suction or discharge piping.

  • Centerline Support – Casing feet are at the shaft centerline, allowing even thermal expansion and preventing misalignment at high temperatures (up to 400°C).

  • Double Suction Impeller – Hydraulically balanced axial thrust, significantly lower NPSHr compared to single suction designs. Ideal for high flow, low NPSH available applications.

  • Between Bearings – Shaft supported by two bearings (radial and thrust) for minimal deflection, low vibration, and long bearing life.

  • API 682 Mechanical Seal Compatibility – Accepts all API 682 seal plans (single, dual, tandem, gas barrier) for any fluid type.

Typical Performance Range

ParameterRange
Flow rateup to 2,500 m³/h (11,000 GPM) – higher on request
Total headup to 250 m (820 ft)
Working pressureup to 30 bar (435 psi)
Temperature-40°C to +400°C (-40°F to +752°F)
Speed1480 / 2980 rpm (50 Hz) or 1750 / 3550 rpm (60 Hz)

Materials of Construction

ComponentStandard Options
CasingCarbon steel (WCB), 304, 316L, duplex
Impeller316L, duplex, 17-4PH
Shaft4140, 316L, duplex
Wear ringsHardened 316L, Colmonoy-coated
GasketsGraphite spiral wound, PTFE

Main Applications

  • Refinery – Crude oil transfer, atmospheric tower reflux, naphtha/diesel/gas oil pumping, light hydrocarbon service.

  • Petrochemical – Circulation pumps for ethylene, propylene, methanol; quench water pumps; process water.

  • Power Plant – Cooling water circulation, condenser cooling, auxiliary cooling water, raw water intake.

  • Industrial Water Supply – High flow water distribution, reverse osmosis feed (low pressure stage), municipal water boosting.

  • Chemical Industry – Slightly corrosive liquids, high temperature organic fluids, large volume process feed.

Why Choose Our BB1 Pump?

  • Easy maintenance – Axial split design allows rotor inspection and replacement without removing piping or motor. Typical overhaul time is 50% less than radial split BB2.

  • Low NPSH performance – Double suction impeller reduces NPSHr by up to 50% compared to single suction pumps of similar flow.

  • Thermal reliability – Centerline mounting keeps the pump aligned even during hot start-up or process swings.

  • Long lifespan – Heavy-duty bearings, stiff shaft, and balanced impeller result in <2.5 mm/s vibration and 40,000+ hours bearing life.

  • Full customization – OEM/ODM available. We tailor materials, seal plan, nozzle orientation, baseplate, and coupling to your exact duty.

Free Technical Documentation

We provide at no cost:

  • BB1 pump datasheet (API 610 format)

  • Performance curve (head, efficiency, NPSHr)

  • 2D dimensional drawing (PDF/DWG)

  • 3D model (STEP/IGES)

  • Quotation (EXW / FOB / CIF)

How to Get Your Free BB1 Pump Datasheet, Drawing & Quotation

To receive an accurate proposal, please send us the following information:

  • Flow rate (m³/h or GPM)

  • Total head (m or ft)

  • Operating temperature (°C or °F)

  • Fluid name (and any corrosivity details)

  • Required material (if known)

Our engineering team will reply within 24 hours with the recommended BB1 pump model, performance curve, CAD drawing, and factory direct price.

Email: info@hyrig.com

We are a professional API 610 pump manufacturer (BB1, BB2, BB3, OH types) serving EPC contractors, refineries, petrochemical complexes, power utilities, and water projects worldwide. Contact us for competitive wholesale pricing and lifetime technical support.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit