BB1 Pump Project Cases – Refinery, Power Plant, Chemical & Industrial Water Success Stories

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Four successful BB1 pump project cases. Case 1: Refinery process circulation – API 610 BB1 pump for refined oil circulation, high temperature, stable year-round operation, low failure rate. Case 2: Power plant cooling water system – BB1 large flow double suction pump for circulating water, high efficiency, energy saving, meets full load demand. Case 3: Chemical factory corrosive medium – 316L material BB1 pump for corrosive liquid transfer, anti-corrosion, leakage-free. Case 4: Industrial park water supply – multiple BB1 pump sets for centralized water supply, stable flow and pressure. We provide site photos, parameter lists, and project references for each installation.

Conatct For Details
DetailReview(0)Additional

This page presents verified field cases of our API 610 BB1 horizontal axial split, between-bearings, double suction pumps operating reliably in demanding continuous service. Each case demonstrates the pump's ease of maintenance, high temperature stability, and cost-effective performance.


Case 1 – Refinery Process Circulation (Middle East Refinery)

Background: A refinery needed a reliable pump for refined oil circulation (diesel/gas oil) at elevated temperature. The existing pump suffered from seal leaks and high maintenance frequency.

BB1 Pump Solution:

  • Flow: 850 m³/h

  • Head: 140 m

  • Temperature: 250°C

  • Material: Carbon steel casing, 316L impeller

  • Seal: API 682 Plan 23 mechanical seal

  • Mounting: Centerline support

Results:

  • Stable year-round operation with no unplanned downtime

  • Low failure rate – only routine annual inspection required

  • Axial split casing allowed quick seal replacement without removing piping

  • User reported 40% reduction in maintenance costs

Available references: Site photo, operating log, maintenance record.


Case 2 – Power Plant Cooling Water System (Southeast Asia)

Background: A 300 MW coal-fired power plant required a large volume circulating water pump for condenser cooling. The plant needed high efficiency and energy savings to reduce operational costs.

BB1 Pump Solution:

  • Flow: 2,200 m³/h

  • Head: 32 m

  • Material: Cast iron casing, stainless steel shaft

  • Speed: 740 rpm (low speed for large flow)

Results:

  • High efficiency (86%) at duty point

  • Energy saving of 8% compared to previous pump

  • Met full load power plant demand across summer and winter conditions

  • Double suction design eliminated axial thrust, reducing bearing temperature

Available references: Site installation photo, performance test report, efficiency comparison chart.


Case 3 – Chemical Factory Corrosive Medium (China)

Background: A chemical plant needed a pump for transferring slightly corrosive liquid (dilute acid, 70°C) with zero leakage requirement due to environmental regulations.

BB1 Pump Solution:

  • Flow: 400 m³/h

  • Head: 65 m

  • Temperature: 70°C

  • Material: 316L stainless steel (casing, impeller, shaft)

  • Seal: API 682 Plan 53B dual mechanical seal

Results:

  • Completely leak-free operation for 2+ years

  • No corrosion on wetted parts (316L provided excellent resistance)

  • Axial split design allowed easy internal inspection during annual shutdown

  • The plant ordered two additional BB1 pumps for other chemical transfer lines

Available references: Site photo, material certificate (EN 10204 3.1), seal plan diagram.


Case 4 – Industrial Park Centralized Water Supply (Eastern Europe)

Background: An industrial park required multiple parallel pumps for a centralized water supply system serving several factories. Stable flow and pressure across varying demand were critical.

BB1 Pump Solution:

  • Three BB1 pumps operating in parallel (2 duty + 1 standby)

  • Flow per pump: 950 m³/h

  • Head: 85 m (constant pressure)

  • Material: Cast iron casing, bronze impeller (for potable water)

Results:

  • Stable flow and pressure maintained across daily demand fluctuations

  • VFD-ready design allows speed control for energy savings

  • Low vibration (<2.0 mm/s) and quiet operation

  • Easy maintenance – pumps can be inspected one at a time without shutting down the entire water supply

Available references: Station layout drawing, site photos, pump house installation images.


What You Can Request From Us for Each Case

  • Site photos and installation images

  • Project parameter sheet (flow, head, power, material, seal type)

  • Actual operating data (pressure, temperature, vibration, bearing temperature)

  • User reference contact (with prior permission)

Why Real Project Cases Matter

Field references prove that our BB1 pumps deliver:

  • Stable year-round operation in refinery, power, and chemical services

  • High efficiency and energy savings for large flow cooling water

  • Corrosion resistance and leak-free performance with 316L and API 682 seals

  • Reliable parallel operation for industrial water supply

Get the Complete BB1 Pump Case Study Package

We can match your operating conditions to similar successful installations. Request the BB1 pump project case PDF or ask for references in your specific industry.

Email: info@hyrig.com

Please specify your industry (refinery / power plant / chemical / water supply) and we will send relevant case studies, photographs, and technical data within 24 hours. We also welcome inquiries for custom BB1 pump selection and factory direct pricing.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit