BB2 Pump – API 610 Heavy Duty Between Bearings Centrifugal Pump for Refinery & Petrochemical

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
BB2 pump is an API 610 (11th edition) horizontal, radially split, between-bearings centrifugal pump for heavy-duty process applications. Casing centerline mounted for high temperature service. Flow up to 3400 m³/h, head up to 450 m, pressure up to 50 bar, temperature range -80°C to +425°C. Double suction or single suction impeller provides low NPSH. Shaft between bearings ensures minimal deflection under 2x API nozzle loads. API 682 cartridge mechanical seal. Materials: carbon steel, 316L stainless steel, duplex, super duplex. Typical services: refinery transfer, amine, hot oil, boiler feed, FPSO, nuclear power.

Conatct For Details
DetailReview(0)Additional

The BB2 pump is a horizontal, radially split, between-bearings centrifugal pump manufactured in strict compliance with API 610 (latest edition). It is specifically engineered for high-temperature, high-pressure, large-flow, and continuous heavy-duty services in refining, petrochemical, power generation, and offshore applications.

Key Design Features

  • API 610 BB2 Type – Radially split casing, centerline mounted for high-temperature thermal expansion management.

  • Between Bearings Configuration – Rotor is supported by two bearings with the shaft passing through the casing, minimizing deflection even under 2× API nozzle load limits.

  • Impeller Options – Double suction (low NPSH) or single suction, depending on hydraulic requirements.

  • Low NPSH Performance – Optimized inlet design reduces cavitation risk, critical for refinery and booster services.

  • Seal Compatibility – Accepts API 682 cartridge mechanical seals (all plans), including high-temperature and high-pressure configurations.

Performance Range

  • Flow rate: up to 3,400 m³/h (15,000 GPM)

  • Total head: up to 450 m (1,480 ft)

  • Discharge pressure: up to 50 bar (725 psi) – higher with special design

  • Temperature range: -80°C to +425°C (-112°F to +797°F)

  • Speeds: 1480 / 2980 rpm (50 Hz) or 1750 / 3550 rpm (60 Hz)

Materials of Construction

ComponentStandard Options
CasingCarbon steel (WCB), 316L stainless steel (CF8M), Duplex (4A/5A), Super Duplex (6A)
ImpellerCarbon steel, 316L, duplex, super duplex, 17-4PH
Shaft4140, 316L, duplex, K500 (Monel)
Wear ringsHardened 316L, Colmonoy, duplex
GasketsGraphite, spiral wound, PTFE

Typical Applications

  • Refinery services – crude oil transfer, atmospheric/vacuum tower bottoms, heavy gas oil, slurry, and intermediate products.

  • Petrochemical plants – amine circulation (rich/lean), glycol dehydration, methanol feed, hot oil circulation.

  • Power generation – boiler feed (intermediate pressure), cooling water circulation, condensate extraction.

  • FPSO & offshore platforms – produced water, crude export, seawater lift.

  • Industrial – steel mill descaling, paper mill process water, sugar beet diffusion.

Why Choose Our BB2 Pump?

  • API 610 full compliance – including baseplate, coupling guard, piping, and instrumentation.

  • Heavy-duty casing – designed for continuous operation with minimal vibration and long bearing life.

  • Easy maintenance – radially split design allows rotor removal without disturbing piping or motor.

  • Custom engineering – OEM/ODM support: change nozzle orientation, bearing housing type, seal plan, coating, and driver arrangement.

  • Factory testing – hydraulic, NPSH, vibration, and hydrostatic tests with witness invitation.

Download Technical Documents

We provide free access to:

  • BB2 pump brochure (performance overview & features)

  • 2D dimensional drawing (PDF/DWG)

  • 3D model (STEP/IGES)

  • Typical cross-section drawing with part list

Get Your BB2 Pump Quotation in 24 Hours

To receive a prompt and accurate BB2 pump proposal, please send us the following operating conditions:

  • Flow rate (m³/h or GPM)

  • Total head (m or ft)

  • Fluid (name, specific gravity, viscosity)

  • Temperature (°C or °F)

  • NPSH available (if known)

  • Material preference (if any)

Our engineering team will reply with:

  • Recommended BB2 pump model

  • Performance curve with duty point

  • Dimensional drawing

  • EXW / FOB / CIF price and delivery time

Email: info@hyrig.com

We serve engineering companies, EPC contractors, refineries, petrochemical plants, and offshore operators worldwide. Whether you need a single replacement pump or a fleet for a new project, contact us for API 610 BB2 pumps at factory-direct wholesale pricing.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit