This page provides complete technical specifications for our BB2 horizontal, radially split, between-bearings centrifugal pump, manufactured in accordance with API 610 (latest edition) for heavy-duty refinery, petrochemical, and industrial process services.
Performance Data
| Parameter | Range |
|---|---|
| Flow rate | 15 ~ 3,400 m³/h (66 ~ 15,000 GPM) |
| Total head | 50 ~ 450 m (164 ~ 1,480 ft) |
| Speed | 1480 / 2980 rpm (50 Hz) or 1750 / 3550 rpm (60 Hz) |
| Temperature range | -80°C ~ +425°C (-112°F ~ +797°F) |
| Maximum working pressure | 50 bar (725 psi) – higher on request |
| NPSH required | Low NPSH design available (double suction impeller minimizes NPSHr) |
Construction & Mechanical Features
Type: Horizontal, radially split casing, between-bearings (API 610 BB2 designation)
Stage configuration: Single-stage (standard), double suction impeller for axial thrust balance
Casing mounting: Centerline support for high-temperature service – allows thermal expansion without misalignment
Impeller: Double suction, fully shrouded, dynamically balanced to ISO 1940 Grade G2.5
Shaft: Forged steel (4140 or 316L), heavy-duty diameter-to-span ratio minimizes deflection under API nozzle loads
Bearings: Options – ball/ball (standard), sleeve/ball, or tilt pad (for high speed or heavy load)
Bearing lubrication: Ring oil (standard) or forced feed (optional)
Sealing: API 682 cartridge mechanical seal (all plans: Plan 11, 21, 23, 52, 53A/B/C, 54, 72, etc.)
Material Options
| Component | Standard Materials | Upgrade Options |
|---|---|---|
| Casing | Carbon steel (WCB), 304, 316L | Duplex 4A/5A, Super Duplex 6A |
| Impeller | 316L stainless steel | Duplex, 17-4PH, CD4MCu |
| Shaft | 4140 (AISI 4140), 316L | Duplex, K500 (Monel) |
| Wear rings | 316L stainless steel | Hardened 316L, Colmonoy-coated, duplex |
| Gaskets | Graphite spiral wound | PTFE, flexitallic |
API 610 Compliance
Our BB2 pump fully complies with API 610 requirements for:
Nozzle loads (2× API allowable)
Vibration limits (bearing housing and shaft)
Hydrostatic test pressure (1.5× rated pressure)
Performance tolerance (per ISO 9906 Grade 2)
Nameplate marking and documentation package
Available Documentation (Free Request)
We provide the following technical documents for every BB2 pump model:
API 610 Data Sheet – complete with all design and operating parameters
2D Installation Drawing – dimensional layout, foundation bolt locations, nozzle coordinates (PDF/DWG)
3D Model – STEP file (IGES) for integration into your plant design
Performance Curve – head, efficiency, NPSHr vs flow, including multiple impeller trims
Material Certificate – EN 10204 3.1 (or 3.2 on request)
Hydraulic Test Report – witnessed or unwitnessed as required
Why Accurate Technical Specifications Matter
Pumping applications in refineries, petrochemical plants, and power stations demand precise hydraulic and mechanical matching. Our BB2 pump technical data allows engineers and EPC contractors to:
Verify duty point compatibility
Perform API 610 nozzle load calculations
Design foundation and piping supports
Select the correct seal flushing plan
Plan maintenance and spare parts inventory
Get Your BB2 Pump Specification Package
Send us your operating conditions and we will provide complete technical documentation with a formal quotation.
Email: info@hyrig.com
Please include:
Flow rate (m³/h)
Total head (m)
Fluid name and temperature
Any material or seal preference
Our engineering team will respond within 24 hours with:
Detailed API 610 data sheet
CAD drawing (2D) and 3D model link
Performance curve PDF
EXW / FOB price and lead time
We supply BB2 pumps to engineering companies, oil refineries, petrochemical complexes, and power plants worldwide – factory direct with full warranty and after-sales support.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.