NOV Brandt Compatible Hydrocyclones | 4" & 10" CTX Cones

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG supplies a full range of compatible replacement hydrocyclone cones for NOV Brandt desander and desilter systems. This range includes the 4-inch CTX desilter cone (replacing 26AW / 406-218-U) and the 10-inch CTX desander cone (replacing 106-200), engineered for drop-in installation on existing King Cobra and VSM 300 manifolds. NOV Brandt is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by NOV Brandt or National Oilwell Varco.
Conatct For Details
DetailReview(0)Additional

Key Facts



Compatible ModelsBrandt 26AW (4" Desilter), 406-218-U (4" CTX), 106-200 (10" Desander)
Cone Sizes4-inch CTX Desilter, 10-inch CTX Desander
Flow Capacity50–65 GPM (4" per cone), 400–500 GPM (10" per cone)
Separation Range15–70 μm (4" mud), 90–120 μm (10" mud)
Body MaterialAbrasion-resistant urethane; ceramic inserts available
Manifold Interface2" Victaulic (4"), Grooved-end (10")
Replacement CompatibilityDrop-in replacement for King Cobra / VSM 300 desander/desilter sections

Key Specifications (Complete Model Range)

Parameter4" CTX Desilter Cone10" CTX Desander Cone
Replacement Part No.26AW / 406-218-U106-200
Cone Diameter4 in (102 mm)10 in (254 mm)
Flow Capacity50–65 GPM per cone400–500 GPM per cone
Separation Range (Mud)15–70 μm90–120 μm
Body MaterialUrethane / Ceramic insert optionalUrethane / Ceramic optional
Underflow ControlAdjusting nut (26AO), bushing (26AA)Adjusting nut (106-205), apex (106-204)
Coupling Type2" Victaulic grooved-endGrooved-end (GxG)

Data source: Technical data table.

Dimensions

ModelOverall HeightInlet/Outlet InterfaceApprox. Weight
4" CTXMatches 26AW hopper outline2" Victaulic grooved-end4–6 kg
10" CTXMatches 106-200 outlineGrooved-end (GxG)15–20 kg

Structure / Working Principle

Hydrocyclone cones separate solids from drilling fluid using centrifugal force. Mud enters tangentially and spins inside the cone; heavier sand and silt particles are pushed to the wall and exit through the underflow, while cleaner fluid rises through the vortex finder. The 10" CTX desander handles primary sand removal at higher flow rates (400–500 GPM), while the 4" CTX desilter polishes the mud by removing fine silt (15–70 μm).

Both sizes feature field-replaceable wear components. The 4" CTX uses a replaceable adjusting nut (26AO) and bushing (26AA). The 10" CTX features modular sections: a replaceable bottom section (106-201) and middle section (106-208). This modularity allows you to replace only the worn section without discarding the entire assembly.

Cross-Reference & Replacement

Upgrading or replacing worn cones across your mud cleaner? Here is what to check:

  1. Size and Stage: Confirm whether your manifold needs 10" CTX desander cones (primary sand removal) or 4" CTX desilter cones (fine silt removal).
  2. Part Number System: For 4" cones, verify whether your system uses the 26AW (Hopper 4′) or 406-218-U (CTX complete) numbering system.
  3. Wear Part Options: Decide between standard urethane and ceramic inserts for high-abrasive formations.

Not interchangeable with: Cones designed for non-Victaulic flanged manifolds or non-standard manifold layouts. If your manifold has a custom bolt pattern, contact HYRIG with the manifold drawing before ordering.

Applications

  • King Cobra / VSM 300 Mud Cleaners: Direct replacements for worn 10" desander and 4" desilter sections.
  • High-Sand Formations: Ceramic insert options extend service life where standard urethane erodes too quickly.
  • Weighted Mud Systems: Adjustable underflow control helps balance fine-solids removal against barite loss.

Selection Support

Not sure whether your manifold accepts 10" CTX desander or 4" CTX desilter cones, or whether a ceramic insert is right for your formation?

Send us your manifold drawing or current cone nameplate, and we will confirm the exact matching replacement.

Spare Parts

HYRIG provides a full range of replacement parts for compatible hydrocyclone cones.

  • 4" CTX Desilter: Complete assembly (26AW / 406-218-U), adjusting nut (26AO), bushing (26AA).
  • 10" CTX Desander: Complete cone (106-200), bottom section (106-201), middle section (106-208), adjusting nut (106-205).

To browse individual wear parts and inspection guidelines, see our Brandt CTX hydrocyclone wear parts index.

Frequently Asked Questions

Q1: Are these original NOV Brandt hydrocyclone cones?
A: No. HYRIG supplies independent, compatible replacement cones and is not affiliated with or endorsed by NOV Brandt.

Q2: How do I choose between the 10" desander and 4" desilter cones?
A: Use 10" CTX cones to remove sand at 400–500 GPM; use 4" CTX cones to remove fine silt at 50–65 GPM.

Q3: Do you supply the ceramic insert options for Brandt cones?
A: Yes. Ceramic inserts are available for both 4" and 10" CTX cones to extend wear life in harsh formations.

Q4: What is the lead time for bulk cone replacement orders?
A: Standard urethane cones ship in 2–3 weeks. Ceramic options may require 4–5 weeks. Plan ahead for year-end shutdowns.

Q5: What are the most common wear parts on these cones?
A: The 4" adjusting nut (26AO) and 10" apex (106-204) wear fastest. Inspect them every 1,000 operating hours.

Contact

For NOV Brandt-compatible hydrocyclone cone selection and spare parts, contact HYRIG: info@hyrig.com

What to include for fastest quote:

  • Manifold layout or current cone part number
  • Required sizes (4" CTX, 10" CTX)
  • Material preference (Urethane or Ceramic)
  • Destination port
Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit