The OH2 Pump is an API 610 Type OH2 horizontal, single‑stage, overhung, centerline‑mounted centrifugal pump. It features a radially split casing with end‑suction, top‑discharge configuration. The design ensures thermal stability, easy maintenance (back pull‑out), and compliance with ISO 13709.
The OHH Pump is a heavy‑duty version of the OH2 type, offering the broadest hydraulic coverage in the industry. It is designed for refinery, petrochemical, and gas processing services requiring higher pressures (up to 110 bar) and higher temperatures (up to 425°C).
The OHHL Pump is a low‑flow OH2 variant that covers the lower end of the OHH range. Its unique low‑flow impeller‑diffuser design provides stable performance and high head at small capacities (1–60 m³/h).
As a China API 610 pump manufacturer, we produce these three families to meet a wide scope of process duties.
These pumps handle a broad range of industrial liquids:
Clean or slightly contaminated liquids – water, condensate, light hydrocarbons
Corrosive or neutral fluids – acids, caustics, organic compounds, brines
High‑temperature services – hot oils, thermal fluids, vacuum bottoms (up to 450°C)
Low‑temperature services – liquefied gases, LNG, refrigerants (down to –80°C)
Hydrocarbons & petroleum products – crude oil, diesel, jet fuel, gasoline, LPG
Chemical & petrochemical streams – amines, glycols, methanol, ammonia
Slurries & particulate‑laden liquids – coal slurry, pulp, desulfurization fluids (with proper materials)
All three types are compatible with API 682 mechanical seals and a full range of flush plans.
| Parameter | OH2 Pump | OHH Pump | OHHL Pump |
|---|---|---|---|
| Flow rate (Q) | 3 – 2,600 m³/h | 5 – 2,400 m³/h | 1 – 60 m³/h |
| Total head (H) | 4 – 300 m | Up to 360 m | 20 – 450 m |
| Operating temperature | –80°C to +450°C | –75°C to +425°C | –75°C to +425°C |
| Design pressure | Up to 7.5 MPa (75 bar) | Up to 11.0 MPa (110 bar) | Up to 5.1 MPa (51 bar) |
| Discharge sizes | 25 – 400 mm | 25 – 400 mm | 25 – 50 mm |
| Speed (rpm) | 1450 / 2950 | 1450 / 2950 / 3600 | Up to 3600 |
| Materials | Cast steel, 304/316SS, duplex, Hastelloy, titanium | Carbon steel, 316SS, duplex, high alloys | Same as OHH |
| Feature | Description |
|---|---|
| Back pull‑out design | Remove rotor, bearings, and seal without disconnecting piping or moving driver. |
| Centerline mounting | Feet at casing centerline; allows thermal expansion without misalignment. |
| Radially split casing | Robust, high‑pressure‑capable, easy to inspect. |
| API 682 seal chamber | Accepts all API 682 cartridge seals (single, tandem, double). |
| Rigid shaft | Minimal deflection meets or exceeds API 610 limits; long seal and wear ring life. |
| Renewable wear rings | Replaceable casing/impeller rings maintain efficiency over time. |
| Closed impeller | Dynamically balanced to ISO 1940 G2.5; optional inducer for low NPSH. |
| Bearing housing | Finned or water‑cooled; oil ring or oil mist lubrication. |
OHH: Broader performance map, higher pressure rating (110 bar), finned bearing housing + fan cooling; modular interchangeability of shafts, casings, covers, seals.
OHHL: Same bearing frame and seals as OHH for parts commonality; patented low‑flow impeller‑diffuser provides stable head‑capacity curves; heavy‑duty baseplate with 2x API 610 nozzle load options.
Petroleum refining – crude transfer, vacuum bottoms, alkylation feed, LVGO/HVGO
Petrochemical & chemical – raw material feed, product transfer, corrosive liquid handling
Oil & gas – onshore/offshore production, pipeline transport, FPSO auxiliary services
Coal chemical – coal slurry, water slurry, gasification process pumps
Power generation – boiler circulation, desulfurization, high‑temperature water
Water & environmental – desalination, brine injection, wastewater treatment
Full compliance with API 610 11th Edition and ISO 13709
Wide hydraulic coverage from 1 m³/h to 2,600 m³/h, head up to 450 m
High temperature capability up to 450°C, pressure up to 110 bar
Back pull‑out design for easy, low‑cost maintenance
Modular components reduce spare parts inventory
Engineered for continuous heavy‑duty operation
API 682 cartridge seals with Plan 52/53B for zero emissions
Cost‑effective alternative to Western brands without quality compromise
For more information or a custom quotation, please contact us at:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.