The Desulfurization Rich Liquid Pump is a specialized centrifugal pump designed to transfer “rich” solvent – the H₂S and CO₂‑loaded amine solution – from the bottom of the absorber (contactor) to the regenerator (stripper) in refinery hydrodesulfurization (HDS), natural gas sweetening, Claus tail gas treatment, and carbon capture (CCUS) processes. This rich liquid is highly corrosive, contains toxic hydrogen sulfide, and may be at elevated temperatures.
To ensure safe, emissions‑free, and reliable operation under these severe conditions, the pump is manufactured and certified to API 610 11th/12th edition (ISO 13709) standards – guaranteeing a 20‑year design life and a minimum 3‑year uninterrupted service.
| Pump Type | Configuration | Best Rich Liquid Duty |
|---|---|---|
| OH2 (Preferred) | Overhung, centreline‑mounted, single‑stage | Standard rich amine transfer from absorber to regenerator (heads ≤150 m, flows to 600 m³/h) |
| BB3 | Axially split, multistage, between bearings | High‑head rich liquid (>150 m) when regenerator is elevated or absorber pressure is very high |
| VS4 | Vertical suspended sump / can type | Sump or pit collection of rich liquid drains; low NPSHa installations |
| Parameter | OH2 | BB3 | VS4 |
|---|---|---|---|
| Flow range | 10 – 600 m³/h | 50 – 1500 m³/h | 10 – 750 m³/h |
| Head range | 20 – 260 m (typical ≤150 m) | 100 – 1500 m | 15 – 280 m |
| Pressure rating | Up to 64 bar | Up to 150 bar | Up to 40 bar |
| Temperature | –45 to +200°C | –45 to +200°C | –46 to +260°C |
| Speed | 1,450 / 2,950 rpm | 1,450 / 2,950 rpm | 1,450 / 2,950 rpm |
Rich amine (MDEA, MEA, DEA loaded with H₂S, CO₂, and heat‑stable salts) is highly corrosive. 316L stainless steel (API 610 Class S‑8) is the minimum requirement. Carbon steel (C‑6) must not be used.
| Component | Material (Standard) | Upgrade Option |
|---|---|---|
| Casing | 316L SS (CF3M) | Duplex (D‑1/D‑2), Super Duplex (U‑8) |
| Impeller | 316L SS | Duplex, Super Duplex, 17‑4 PH |
| Shaft | 316 SS or 4140 with coating | 17‑4 PH, Duplex SS |
| Wear rings | 316L SS + Stellite hard‑facing | Tungsten carbide |
| Gaskets / O‑rings | Spiral wound (graphite) / FKM | Aflas for higher temperature |
For rich amine containing H₂S partial pressure above NACE limits, NACE MR0175 / ISO 15156 certification is required.
Because the fluid contains toxic H₂S, fugitive emissions must be eliminated. Dual pressurized seals (API 682 Arrangement 3) with Plan 53B (bladder accumulator) are mandatory.
| Seal Arrangement | API 682 Plan | Application |
|---|---|---|
| Dual pressurised (Arr. 3) | Plan 53B | Standard for all desulfurization rich liquid pumps – zero emissions, barrier fluid pressure > process |
| Tandem seal (Arr. 2) | Plan 52 | Not recommended for H₂S service |
| Single seal (Arr. 1) | Plan 11 / 21 | Not permitted – H₂S leakage risk |
Plan 53B provides a barrier fluid pressurised above process pressure using a bladder accumulator, preventing any amine or H₂S from leaking to atmosphere. It includes a reservoir with level indicator and low‑pressure alarm. Seal faces: silicon carbide (SiC) / SiC. Elastomers: FKM (Viton) for up to 120°C; Aflas for higher temperatures.
The rich liquid pump typically takes suction from the bottom of an absorber operating at moderate to high pressure (5–20 barg). NPSHa is generally adequate, but dissolved gases (H₂S, CO₂, methane) can flash if suction pressure drops. Ensure no pressure loss between the absorber nozzle and pump suction flange. For low‑pressure absorbers, provide an inducer on the first‑stage impeller.
Because the rich liquid flow varies with gas throughput, the pump must be protected from operation below Minimum Continuous Stable Flow (MCSF). An automatic recirculation valve (ARC) or a continuous bypass line with orifice returns minimum flow to the suction source (absorber or surge drum). This is especially critical for BB3 multistage pumps.
| Industry | Process | Rich Liquid | Pump Configuration |
|---|---|---|---|
| Refinery HDS | Hydrodesulfurization | Rich MDEA / DEA (H₂S + CO₂) | OH2 (standard) |
| Natural gas sweetening | Amine treating | Rich MDEA / MEA | OH2 or BB3 (tall regenerator) |
| Claus tail gas treatment | TGTU | Rich MDEA | OH2 |
| CCUS | Carbon capture | Rich MEA | OH2 (larger flows) |
| Syngas purification | Ammonia / methanol | Rich MDEA | OH2 |
Design life: 20 years minimum
Continuous operation: Minimum 3 years uninterrupted service
Bearing life: L10 ≥25,000 hours
Critical speed: ≥120% of maximum operating speed
Centreline mounting (OH2/BB3): Thermal stability for hot rich liquid
Hydrostatic test: 1.5x design pressure
Performance test: Water per API 610 Grade 1 or 2
Material certification: EN 10204 3.1 full traceability
NACE MR0175 / ISO 15156 available for sour service
Full API 610 compliance (OH2 / BB3 / VS4) – 11th/12th edition ISO 13709, 20‑year life
316L stainless steel (S‑8) as standard – proven resistance to H₂S and CO₂ corrosion
API 682 Plan 53B dual pressurised seals – zero emissions, mandatory for H₂S‑laden rich amine
Broad hydraulic coverage – flows 10–1500 m³/h, heads 20–1500 m
Low NPSH designs – inducer option for low‑pressure absorbers
Centreline mounting – handles elevated temperatures
Easy maintenance – back pull‑out (OH2), axial split (BB3), vertical withdrawable (VS4)
Minimum flow protection – ARC or bypass integrated
NACE MR0175 / ISO 15156 compliant options – for high H₂S partial pressure
Field proven – thousands of units in refineries and gas plants worldwide
| Component | Recommended Quantity |
|---|---|
| Mechanical seal cartridge (API 682 Plan 53B ready) | 1 set |
| Bearing set (radial + thrust) | 1 set |
| Wear ring set (casing + impeller) | 1 set |
| Gasket / O‑ring kit (full set) | 1 set |
| Inducer (if fitted) | 1 set |
For selection of the correct Desulfurization Rich Liquid Pump for your refinery or gas plant – including rich amine composition, H₂S partial pressure, flow and head calculations, NACE MR0175 certification, API 682 seal plan (Plan 53B), and complete API 610 data sheet – please contact our engineering team.
Email: info@hyrig.com
Our engineers support refinery HDS, gas sweetening, and carbon capture projects worldwide with reliable, emissions‑compliant API 610 desulfurization rich liquid pumps – safe transfer of H₂S‑laden rich amine from absorber to regenerator.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.