The Amine Rich Pump is purpose‑built for transferring “rich amine” – the alkanolamine solution (MDEA, MEA, DEA) that has absorbed H₂S and CO₂ from sour gas streams – from the bottom of the absorber column to the regenerator (stripper). This rich amine is highly corrosive, contains toxic hydrogen sulfide, and is often at elevated temperatures and moderate to high pressures. Safe, leak‑free, and reliable transfer is essential for continuous gas sweetening and refinery desulfurization operations.
All pumps are fully manufactured and certified to API 610 11th/12th edition (ISO 13709) standards, ensuring a minimum 3‑year uninterrupted operation and a 20‑year design life. Available in three API 610 configurations – OH2 (single‑stage overhung), BB3 (multistage between bearings), and VS4 (vertical sump) – the Amine Rich Pump covers all typical rich amine transfer duties.
| Pump Type | Configuration | Best Rich Amine Application |
|---|---|---|
| OH2 (Preferred) | Overhung, centreline‑mounted, single‑stage | Standard rich amine transfer from absorber to regenerator (heads ≤150 m, flows 10–600 m³/h) |
| BB3 | Axially split, single casing, multistage, between bearings | High‑head rich amine (>150 m) for tall regenerators or high‑pressure systems |
| VS4 | Vertical suspended sump / can type | Rich amine sump evacuation, drain pit collection, low NPSHa installations |
| Parameter | OH2 | BB3 | VS4 |
|---|---|---|---|
| Flow range | 10 – 600 m³/h | 50 – 1500 m³/h | 10 – 750 m³/h |
| Head range | 20 – 260 m (typical ≤150 m) | 100 – 1500 m | 15 – 280 m |
| Pressure rating | Up to 64 bar | Up to 150 bar | Up to 40 bar |
| Temperature | –45 to +200°C | –45 to +200°C | –46 to +260°C |
| Speed | 1,450 / 2,950 rpm | 1,450 / 2,950 rpm | 1,450 / 2,950 rpm |
Rich amine containing H₂S, CO₂, water, and heat‑stable salts is corrosive. 316L stainless steel (API 610 Class S‑8) is the minimum standard. Carbon steel is not acceptable.
| Component | Material (Standard) | Upgrade Option |
|---|---|---|
| Casing | 316L SS (CF3M) | Duplex (D‑1/D‑2), Super Duplex (U‑8) |
| Impeller | 316L SS | Duplex, Super Duplex, 17‑4 PH |
| Shaft | 316 SS or 4140 with coating | 17‑4 PH, Duplex SS |
| Wear rings | 316L SS + Stellite hard‑facing | Tungsten carbide |
| Gaskets / O‑rings | Spiral wound (graphite) / FKM | Aflas for higher temperature |
For rich amine with H₂S partial pressure above NACE limits, NACE MR0175 / ISO 15156 certification is required.
Because rich amine contains toxic H₂S, fugitive emissions must be eliminated. Dual pressurized seals (API 682 Arrangement 3) with Plan 53B (bladder accumulator) are the industry standard.
| Seal Arrangement | API 682 Plan | Application |
|---|---|---|
| Dual pressurised (Arr. 3) | Plan 53B | Mandatory – zero emissions, barrier fluid pressure > process |
| Tandem seal (Arr. 2) | Plan 52 | Not recommended for H₂S service |
| Single seal (Arr. 1) | Plan 11 / 21 | Not permitted |
Plan 53B provides barrier fluid pressurised above process pressure using a bladder accumulator, preventing any amine or H₂S leakage. Seal faces: silicon carbide (SiC) / SiC. Elastomers: FKM for up to 120°C; Aflas for higher temperatures.
The rich amine pump typically takes suction from the bottom of an absorber operating at 5–20 barg. NPSHa is usually adequate, but dissolved gases (H₂S, CO₂, methane) may flash if suction pressure drops. Ensure proper piping design and consider an inducer for low‑pressure absorber service.
An automatic recirculation valve (ARC) or continuous bypass with orifice is required to protect the pump from operation below Minimum Continuous Stable Flow (MCSF), especially during turndown.
| Industry | Process | Rich Amine Type | Recommended Configuration |
|---|---|---|---|
| Refinery HDS | Hydrodesulfurization | Rich MDEA / DEA | OH2 (standard) |
| Natural gas sweetening | Amine treating | Rich MDEA / MEA | OH2 or BB3 (high head) |
| Claus tail gas treatment | TGTU | Rich MDEA | OH2 |
| CCUS (carbon capture) | Post‑combustion capture | Rich MEA | OH2 (larger flows) |
| Syngas purification | Ammonia / methanol plants | Rich MDEA | OH2 |
Design life: 20 years minimum
Continuous operation: Minimum 3 years uninterrupted service
Bearing life: L10 ≥25,000 hours
Critical speed: ≥120% of maximum operating speed
Centreline mounting (OH2/BB3): Thermal stability
Hydrostatic test: 1.5x design pressure
Performance test: Water per API 610 Grade 1 or 2
Material certification: EN 10204 3.1 full traceability
NACE MR0175 / ISO 15156 available for sour rich amine
Full API 610 compliance (OH2 / BB3 / VS4) – 11th/12th edition ISO 13709, 20‑year life
316L stainless steel (S‑8) as standard – proven corrosion resistance in rich amine service
API 682 Plan 53B dual pressurised seals – zero H₂S emissions, mandatory for safety and environmental compliance
Broad hydraulic coverage – flows 10–1500 m³/h, heads 20–1500 m
Low NPSH designs – inducer option for challenging suction conditions
Centreline mounting – handles hot rich amine (up to 200°C)
Easy maintenance – back pull‑out (OH2), axial split (BB3), vertical withdrawable (VS4)
Minimum flow protection – ARC or bypass integrated
NACE MR0175 / ISO 15156 compliant options – for high H₂S partial pressure
Field proven – thousands of units in gas plants, refineries, and carbon capture facilities worldwide
| Component | Recommended Quantity |
|---|---|
| Mechanical seal cartridge (API 682 Plan 53B ready) | 1 set |
| Bearing set (radial + thrust) | 1 set |
| Wear ring set (casing + impeller) | 1 set |
| Gasket / O‑ring kit (full set) | 1 set |
| Inducer (if fitted) | 1 set |
For selection of the correct Amine Rich Pump for your gas sweetening or refinery application – including rich amine composition, H₂S partial pressure, flow and head requirements, NACE MR0175 certification, API 682 seal plan (Plan 53B), and complete API 610 data sheet – please contact our engineering team.
Email: info@hyrig.com
Our engineers support refinery HDS, natural gas sweetening, carbon capture, and tail gas treatment projects worldwide with reliable, emissions‑compliant API 610 amine rich pumps – safe transfer of H₂S‑laden rich amine from absorber to regenerator.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.