HD-2 Combination Valve Part Numbers | R431002823, R431002824, R431002825, R431002826

2026-11-19 20:27

Cross-Reference Table

Pressure rangeNew part no.Old part no.Cross-referenceHandle behaviorMatching model
0–65 psiR431002823P-050970-00001 / P50970-1IA295Friction-lock, maintainedHD-2-FX
0–100 psiR431002824P-050970-00002 / P50970-2IA295Friction-lock, maintainedHD-2-FX
0–125 psiR431002825P-050970-00003 / P50970-3IA541Friction-lock, maintainedHD-2-FX
0–150 psiR431002826P-050970-00004 / P50970-4—Friction-lock, maintainedHD-2-FX

How to Use This Table

  1. Find the number on the old valve or the machine parts manual.  
    Match the full number, including any suffix.
  2. Check the pressure range.  
    65 / 100 / 125 / 150 psi are functional limits, not cosmetic suffixes. Do not substitute a different range unless the downstream pressure requirement allows it.
  3. Check the handle behavior.  
    All numbers in this table correspond to the friction-lock, maintained-position type. If the old valve springs back to center when released, the correct replacement is HD-2-X, not HD-2-FX.
  4. Confirm the port thread.  
    All HD-2-FX configurations use NPT 1/4" ports. A thread mismatch is a fitment issue, not a valve-function issue.

Common Substitution Mistakes

  • Using a spring-return valve where a friction-lock valve is required.  
    HD-2-X returns to neutral when released. HD-2-FX holds the lever position. This changes how the machine behaves without the operator touching the lever.
  • Matching the number but ignoring the pressure range.  
    R431002823 (0–65 psi) and R431002825 (0–125 psi) are not interchangeable unless the downstream pressure requirement allows the change.
  • Treating IA295 as a model name.  
    IA295 is a cross-reference identifier used in the 65 psi and 100 psi FX configurations. It is not a model name. Always confirm the full part number and pressure range.

Frequently Asked Questions

Q: What is the difference between R431002824 and P50970-2?

A: They refer to the same 0–100 psi HD-2-FX configuration. R431002824 is the new-style number; P50970-2 is the older-style number. Either can be used to identify the same pressure range and handle behavior.

Q: Does IA295 cover all HD-2-FX pressure ranges?

A: No. IA295 is used in the 65 psi and 100 psi FX configurations. The 125 psi configuration uses IA541. The 150 psi configuration does not list a cross-reference identifier in this table.

Q: Can I order by the old P50970 number?

A: Yes, if the number and pressure range are confirmed. Send the full old number with a photo of the nameplate to info@hyrig.com; HYRIG will map it to the current equivalent and confirm availability.

Contact

For HD-2 combination valve part-number cross-reference and supply:

info@hyrig.com

HYRIG is a China-based supplier of pneumatic and hydraulic components for drilling and industrial equipment. Supply capability only — HYRIG does not claim ownership of the HD-2 design or any OEM brand.

Related Pages

Name:
Message:
Verification code:
Submit
Comment