HD-2-FX Combination Valve | Friction-Lock Handle, NPT 1/4", 900 L/min

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the HD-2-FX combination valve and its replacement parts. The HD-2-FX is a handle-operated pneumatic combination valve that integrates two 3-way directional sections with a 3-way
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Valve type:Handle-operated combination valve — two 3-way directional sections + one 3-way pressure regulating section.
  • Handle behavior (FX-specific):Friction brake holds the lever wherever it is released; holding friction is adjustable.
  • Most common substitution mistake:HD-2-X springs back to neutral. If the machine requires the lever to stay put, X is the wrong replacement for FX.
  • Port configuration:Inlet port 2; working ports 1 and 3; regulated pressure port 8. All NPT 1/4".
  • Real-world landing points:Main drum combination valve on workover rigs; rotary table combination valve; engine throttle and reverse clutch control circuits.

Key Specifications & Model Comparison

ModelHandle behaviorPressure range optionsPortNominal flowKey differentiator
HD-2-FXFriction brake — holds any position0–65 / 0–100 / 0–125 / 0–150 psiNPT 1/4"900 L/minMaintained-position type
HD-2-XSpring return to neutralSame seriesNPT 1/4"900 L/minReturns to center
HD-2-LXSpring return,extreme position latchSame seriesNPT 1/4"900 L/minLatch at extreme
HD-2-XSSpring return,no graduated pressure from port 8Same seriesNPT 1/4"900 L/minNo gradual pressure

Working pressure range: 0.1–14 bar. Leakage: ≤ 125 ml/min. Approximate weight: 4.1 kg (source variations exist — confirm against the specific order configuration).

Dimensions (Text-Based)

  • Port threads:4 ports, all NPT 1/4" internal.
  • Port 2 — inlet
  • Port 1 — full inlet pressure when lever moves clockwise from neutral
  • Port 3 — full inlet pressure when lever moves counterclockwise from neutral
  • Port 8 — graduated pressure as lever continues to move beyond directional actuation
  • Lever travel logic:Neutral center = both working lines vented. Initial movement either side opens the corresponding directional section at full inlet pressure. Continued movement in the same direction begins graduated pressure delivery from port 8.
  • Weight:4.1 kg approximate reference; exact weight varies by configuration. Confirm with supplier before installation planning.

Cross-Reference & Replacement

Replacing an HD-2-FX? Work from the number on the old valve or the machine parts manual.

Pressure rangeNew part no.Old part no.Cross-referenceFX handle behavior
0–65 psiR431002823P-050970-00001 / P50970-1IA295Friction-lock, maintained
0–100 psiR431002824P-050970-00002 / P50970-2IA295Friction-lock, maintained
0–125 psiR431002825P-050970-00003 / P50970-3IA541Friction-lock, maintained
0–150 psiR431002826P-050970-00004 / P50970-4—Friction-lock, maintained

Check these 3 things before ordering:

  1. Handle behavior first,number second:The old valve must be a friction-lock / maintained-position type. If it springs back to center when released, the correct replacement is HD-2-X, not FX. This is the single most common substitution error.
  2. Pressure range code:65 / 100 / 125 / 150 psi are not interchangeable. Match the range suffix on the old number before matching the number itself.
  3. Port thread:Confirm NPT 1/4" on all four ports. A thread mismatch is a fitment issue, not a valve-function issue.

If you have a number not listed here,send it with a photo of the nameplate to info@hyrig.com;HYRIG will map it to the FX or non-FX equivalent and flag the pressure range difference.

Selection Support

Not sure whether you need FX or X?
Tell HYRIG the machine application (main drum, rotary table, throttle, clutch) and whether the lever needs to stay where it is released. The team will confirm the model code and cross-reference the old number before quoting.

Applications

The HD-2-FX is used in pneumatic circuits that require maintained directional selection combined with graduated pressure control.

Typical landing points include:

  • Main drum combination valve on workover rigs — lever stays at the selected drum control position.
  • Rotary table control — directional engagement with regulated pneumatic pressure.
  • Engine throttle and reverse clutch control — lever holds the throttle or clutch setting without continuous holding.
  • General lever-operated directional + pressure control circuits in oilfield and heavy equipment pneumatic systems.
Application note:The HD-2-FX is a pneumatic control valve. It does not replace independent pressure protection or emergency stop functions in the system.

Frequently Asked Questions

Q: HD-2-FX vs HD-2-X — what actually changes if I substitute?

A: The lever behavior. HD-2-X is spring-return: release it and it goes back to neutral. HD-2-FX has a friction brake that holds the lever at the released position. If the machine needs a maintained throttle or clutch setting, substituting X for FX changes how the valve behaves without the operator touching it.

Q: Can I replace R431002824 with R431002823 or R431002825?

A: Only if the downstream pressure requirement matches the range. R431002824 is 0–100 psi. R431002823 is 0–65 psi, R431002825 is 0–125 psi. The range code is a functional limit, not a cosmetic suffix.

Q: What is IA295 — is it the same as HD-2-FX?

A: IA295 is a cross-reference identifier used in the HD-2-FX 65 psi and 100 psi configurations. It is not a model name. Confirm the pressure range and handle behavior against the full part number before using IA295 as a direct substitute reference.

Q: Is a dimensional drawing available?

A: The interface and lever-travel logic are described above in Dimensions (Text-Based). For a configuration-specific envelope drawing, contact HYRIG with the exact model code.

Contact

For HD-2-FX combination valve selection and cross-reference support:

info@hyrig.com

HYRIG is a China-based supplier of pneumatic and hydraulic components for drilling and industrial equipment. Supply capability only — HYRIG does not claim ownership of the HD-2-FX design or any OEM brand.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit