HD-2 Series Combination Valve | X, FX, LX, XS Comparison

2026-11-19 20:30

Key Facts

  • Series structure:All HD-2 variants share two 3-way directional sections and one 3-way pressure regulating section.
  • Common port size:NPT 1/4" on all four ports.
  • Common nominal flow:900 L/min.
  • Pressure range options:0–65 / 0–100 / 0–125 / 0–150 psi, depending on the order code.
  • What changes between variants:The handle behavior when released — spring return, friction lock, extreme-position latch, or no graduated pressure.

Model Comparison

ModelHandle behaviorPressure range optionsPortNominal flowKey differentiator
HD-2-XSpring return to neutral0–65 / 0–100 / 0–125 / 0–150 psiNPT 1/4"900 L/minReturns to center when released
HD-2-FXFriction brake — holds any position0–65 / 0–100 / 0–125 / 0–150 psiNPT 1/4"900 L/minMaintained-position type
HD-2-LXSpring return,extreme position latch0–65 / 0–100 / 0–125 / 0–150 psiNPT 1/4"900 L/minLatch at extreme position
HD-2-XSSpring return,no graduated pressure from port 80–65 / 0–100 / 0–125 / 0–150 psiNPT 1/4"900 L/minNo gradual pressure delivery

Working pressure range: 0.1–14 bar. Leakage: ≤ 125 ml/min.

How to Choose

Start with the handle behavior required by the machine.

  • If the lever must stay where the operator leaves it — choose HD-2-FX.
  • If the lever must return to neutral automatically — choose HD-2-X.
  • If the lever must latch only at the extreme position — choose HD-2-LX.
  • If the circuit does not require graduated pressure from port 8 — choose HD-2-XS.

For the full HD-2-FX specification, dimensions and cross-reference table, see the dedicated HD-2-FX page.

Dimensions (Text-Based)

  • Port threads:4 ports, all NPT 1/4" internal.
  • Port 2 — inlet
  • Port 1 — working output, one direction
  • Port 3 — working output, opposite direction
  • Port 8 — regulated pressure output
  • Lever travel logic:Neutral center = both working lines vented. Initial movement either side opens the corresponding directional section at full inlet pressure. Continued movement in the same direction begins graduated pressure delivery from port 8 (except HD-2-XS).
  • Weight:Approximate 4.1 kg for FX reference; exact weight varies by variant and configuration. Confirm with supplier before installation planning.

Applications

The HD-2 series is used in pneumatic circuits that require directional selection combined with pressure control. Typical landing points include main drum control on workover rigs, rotary table control, engine throttle control, and reverse clutch control. The correct variant depends on whether the lever needs to stay in position, return to center, or latch at an extreme.

Frequently Asked Questions

Q: What is the main difference between HD-2-X and HD-2-FX?

A: HD-2-X springs back to neutral when released. HD-2-FX has a friction brake that holds the lever at any selected position. If the machine requires a maintained setting, FX is the correct type.

Q: Do all HD-2 variants use the same port size?

A: Yes. All four variants use NPT 1/4" ports on the inlet, both working ports, and the regulated pressure port.

Q: Can I substitute one variant for another without checking?

A: No. The handle behavior is a functional difference. Substituting a spring-return variant for a friction-lock variant changes how the valve behaves when the operator releases the lever.

Contact

For HD-2 series combination valve selection and cross-reference support:

info@hyrig.com

HYRIG is a China-based supplier of pneumatic and hydraulic components for drilling and industrial equipment. Supply capability only — HYRIG does not claim ownership of the HD-2 design or any OEM brand.

Related Pages

Name:
Message:
Verification code:
Submit
Comment