Key Facts
- Typical equipment:Workover rigs, drilling rigs, and heavy equipment with pneumatic control circuits.
- Typical control points:Main drum, rotary table, engine throttle, reverse clutch.
- Valve type used:HD-2-FX friction-lock combination valve — two 3-way directional sections + one 3-way pressure regulating section.
- Why friction-lock matters:The lever stays at the selected position when released. The operator does not need to hold the lever to maintain a drum, table or throttle setting.
- Port size:NPT 1/4" on all four ports.
- Nominal flow:900 L/min.
Why Friction-Lock Matters
On a workover rig or drilling rig, the operator often needs to set a drum control, table control or throttle position and then move their hand to another task. A spring-return valve would return to neutral as soon as the lever is released, changing the machine state. The HD-2-FX uses a friction brake to hold the lever at the selected position. The holding friction is adjustable. This makes it suitable for circuits where a maintained directional or pressure setting is required without continuous operator force.
Typical Landing Points
- Main drum combination valve — lever stays at the selected drum control position.
- Rotary table control — directional engagement with regulated pneumatic pressure.
- Engine throttle control — lever holds the throttle setting without continuous holding.
- Reverse clutch control — lever maintains the selected clutch engagement state.
Dimensions (Text-Based)
- Port threads:4 ports, all NPT 1/4" internal.
- Port 2 — inlet
- Port 1 — full inlet pressure when lever moves clockwise from neutral
- Port 3 — full inlet pressure when lever moves counterclockwise from neutral
- Port 8 — graduated pressure as lever continues to move beyond directional actuation
- Lever travel logic:Neutral center = both working lines vented. Initial movement either side opens the corresponding directional section at full inlet pressure. Continued movement in the same direction begins graduated pressure delivery from port 8.
- Weight:Approximate 4.1 kg reference; exact weight varies by configuration. Confirm with supplier before installation planning.
Selection Support
Not sure which control point needs the friction-lock type?
Tell HYRIG the machine application (main drum, rotary table, throttle, clutch) and whether the lever must stay where it is released. The team will confirm the model code and cross-reference the old number before quoting.
Frequently Asked Questions
Q: Why use a friction-lock valve for main drum control?
A: Because the lever stays at the selected position when released. The operator can set a drum control position and then move their hand without the valve returning to neutral.
Q: Is the HD-2-FX used only for main drum control?
A: No. The same friction-lock behavior is used for rotary table control, engine throttle control and reverse clutch control where a maintained lever position is required.
Q: What port size does the HD-2-FX use?
A: NPT 1/4" on all four ports.
Contact
For main drum, rotary table and workover rig combination valve selection and cross-reference support:
info@hyrig.com
HYRIG is a China-based supplier of pneumatic and hydraulic components for drilling and industrial equipment. Supply capability only — HYRIG does not claim ownership of the HD-2-FX design or any OEM brand.
Related Pages