HYRIG can supply the JL series choke valve range and its replacement parts. The JLK103-70 is a manual, adjustable choke valve with a 103 mm (4") nominal bore, engineered to regulate high-volume flow and pressure in wellhead and choke manifolds. It features a cylinder adjusting mode and flange connections for secure integration.
| Model Number | Nominal Diameter | Pressure (MPa) | A (mm) | B (mm) | Connection Type | Adjusting Mode | Actuator |
|---|---|---|---|---|---|---|---|
| JLK103-70 | 103 mm | 70 | 310 | 166 | Flange | Cylinder | Manual |
| JLKY103-70 | 103 mm | 70 | 310 | 166 | Flange | Cylinder | Hydraulic |
| JLK103-35 | 103 mm | 35 | 260 | 260 | Flange | Needle | Manual |
Data source: Technical data table.
Need hydraulic actuation? View the JLKY103-70 Hydraulic Choke Valve or explore the full JL Choke Valve Series.
The exact footprint for the JLK103-70 configuration is:
Ensure adequate clearance for the cylinder adjustment mechanism and handwheel operation.
The JLK103-70 utilizes a cylinder adjusting mode to precisely control high-volume flow. A handwheel moves the internal cylinder plug relative to the seat, changing the orifice size. This provides robust control for large manifolds.
The "K" in the model code indicates an adjustable design. If you require hydraulic actuation instead of a manual handwheel, choose the "Y" model (JLKY103-70).
Looking for a replacement for your existing 4-inch choke valve? Here’s what to check:
This valve is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure whether you need manual or hydraulic actuation? Tell us your operational requirements, and our engineers will match the correct JLK (manual) or JLKY (hydraulic) model for your manifold.
HYRIG provides replacement parts for the JLK103 series, including:
See our JL Choke Valve Parts page for compatible maintenance kits.
Q: What is the nominal diameter of this valve?
A: The nominal diameter is 103 mm (approximately 4 inches).
Q: Is this valve hydraulic or manual?
A: This model (JLK103-70) is manual. The JLKY103-70 is the hydraulic version.
Q: What is the working pressure of this model?
A: The maximum working pressure is 70 MPa (10,000 psi).
Q: What standards does this valve meet?
A: It is manufactured according to API 6A and API 16C standards.
For JLK103-70 adjustable choke valve selection and replacement parts, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.