HYRIG can supply the JL series choke valve range and its replacement parts. The JLKY103-70 is a hydraulically actuated, adjustable choke valve with a 103 mm (4") nominal bore, engineered to regulate high-volume flow and pressure in automated wellhead and choke manifolds. It is manufactured to API 6A and API 16C standards.
| Model Number | Nominal Diameter | Pressure (MPa) | A (mm) | B (mm) | Connection Type | Adjusting Mode | Actuator |
|---|---|---|---|---|---|---|---|
| JLK103-70 | 103 mm | 70 | 310 | 166 | Flange | Cylinder | Manual |
| JLKY103-70 | 103 mm | 70 | 310 | 166 | Flange | Cylinder | Hydraulic |
| JLK103-35 | 103 mm | 35 | 260 | 260 | Flange | Needle | Manual |
Data source: Technical data table.
Need manual operation? View the JLK103-70 Manual Choke Valve or explore the full JL Choke Valve Series.
The exact footprint for the JLKY103-70 configuration is:
The external dimensions are identical to the manual version (JLK103-70). Ensure adequate space for hydraulic actuator lines and fittings.
The JLKY103-70 utilizes a hydraulic actuator to control the internal cylinder plug. This allows for remote operation and automated pressure regulation, eliminating the need for an operator to physically turn a handwheel in hazardous or hard-to-reach locations.
The "Y" in the model code indicates Hydraulic actuation. It uses hydraulic pressure to move the stem, changing the orifice size to regulate flow.
Looking for a replacement for your existing hydraulic choke valve? Here’s what to check:
This valve is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if your control system is compatible? Tell us your hydraulic supply pressure and connection specifications, and our engineers will match the correct JLKY model.
HYRIG provides replacement parts for the JLKY103 series, including:
See our JL Choke Valve Parts page for compatible maintenance kits.
Q: What does the "Y" stand for in JLKY103-70?
A: The "Y" indicates hydraulic actuation. This valve is controlled remotely via hydraulic pressure, not a manual handwheel.
Q: What is the nominal diameter of this valve?
A: The nominal diameter is 103 mm (approximately 4 inches).
Q: What is the working pressure of this model?
A: The maximum working pressure is 70 MPa (10,000 psi).
Q: Are the dimensions the same as the manual version?
A: Yes, the A (310 mm) and B (166 mm) dimensions are the same as the JLK103-70 manual model, but space must be allowed for hydraulic lines.
For JLKY103-70 hydraulic choke valve selection and replacement parts, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.